DeLonghi PALACE 1800/2 Instruction And Installation Booklet page 6

MANUFACTURER'S DETAILS
Dear customer,
thank you for having chosen us. Before installing and/or using the product, please read this manual on installation,
use and correct maintenance carefully.
DE'LONGHI'S RADIATOR: DL RADIATORS Srl Via delle Industrie, 2, Fossalta di Piave, 30020 ITALY
SALES CONDITIONS AND WARRANTY
Any complaint due to manufacturing defects and / or defects in goods' quality must be written exposed
to DL RADIATORS srl, under penalty of forfeiture within eight days of receiving the products in case of faults
and / or visible defects, and within eight days from the discovery of defects and/or defects if they are hidden.
DL RADIATORS srl radiators are guaranteed 15 years from the manufacturing date. This guarantee consists
in the replacement of those elements that, due to defects in materials or manufacturing, turn out to be
useless and under condition that the system is executed in a workmanlike manner, in accordance with
current standards.
DL RADIATORS srl declines all responsibility in case of accidents deriving from a use of the
radiator that does not comply with these instructions for use. All radiators produced by DL RADIATORS srl
are rigorously tested according to current standards before leaving the factory.
DL RADIATORS srl reserves the right to introduce the technical and construction changes it deems necessary
without notice obligations.
Declaration of Conformity: The radiator, produced by the company DL RADIATORS srl complies with the
essential requirements of Regulation (EU) No. 305/2011.
MATERIALS CONTAINED IN THE PACKAGE
The following elements are not pre-assembled on the radiator.
x 1 Radiator
A
x 8 Screws Ø 4,5*60 mm
E
TOOLS REQUIRED FOR INSTALLATION
Suitable O-Ring valves
G
Tape measure
J
TECHNICAL SPECIFICATIONS
- Material Recycled aluminium.
- Max. operating pressure 20 Bar.
- Packaging the radiator is wrapped in a protective film and inserted in a cardboard
box (attention in the box there are brackets for wall mounting).
CONNECTIONS
[Fig. 3 connections nr. 1, 2, 3, 4]
STANDARD CONNECTIONS: bitube system;
4
x 1 Airvent
B
x 8 Wall plugs Ø 8*50 mm
F
Electric drill Ø 8 mm
H
Level
K
[Fig. 1]
x 1 Closing cap
C
[Fig. 2]
x 4 Brackets
D
Phillips head screwdriver
I