Oster OGMAF2903 Instruction Manual page 32

This microwave oven uses modern electronic control to adjust cooking parameters to meet
your needs better for cooking.
1. Clock Setting
When the microwave oven is electrified,the oven will display "0:00", buzzer will ring once.
Oven into waiting state.
1) In waiting state, Press "Temporizador/Reloj " twice, the hour figures will flash.
2) Turn " " to adjust the hour figures, the input time should be within 1--12(12-hour).
3) Press " Temporizador/Reloj", the minute figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press " Temporizador/Reloj " to finish clock setting. ":" will flash.
Note:
1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press " Parar/Borrar ", the oven will go back
to the previous status automatically.
3) Cooking is finished or no operation for a period of time, Oven into waiting state.
2. Kitchen Timer
1) In waiting state, Press " Temporizador/Reloj " once, buzzer will ring and screen will
display "01:00".
2) Turn " " to enter the correct timer.(The maximum cooking time is 95 minutes.)
3) Press " Confirmar/Inicio/+30seg. " to confirm setting.
4) When the kitchen time is reached, the buzzer will ring 5 times.
If the clock be set(12-hour system), the screen will display the current time.
Note:
(1) The kitchen time is different from 12-hour system,Kitchen Timer is a timer.
(2) During kitchen timer, any program cannot be set.
(3) During timer
"Confirmar/Inicio/+30seg."
3. Microwave Cooking
1) In waiting state, Press "
2) Press " Confirmar/Inicio/+30seg. " to confirm.The "PL10" will light.
3) Press " Función " repeafedly or turn "
from 100% to 10%. "PL10", "PL9", "PL8", "PL7", "PL6", "PL5","PL4", "PL3", "PL2", "PL1"
will display in order.
4) Press " Confirmar/Inicio/+30seg." to confirm.
5) Turn " " to adjust the cooking time. (The time setting should be 00:05 - 95:00.)
6) Press " Confirmar/Inicio/+30seg." to start cooking.
OPERATION
operation Time
Función
" once and "PL10" will flash.
English-10
cannot be increased
" right to select the microwave power
by pressing