Advertisement
Temperature Monitoring Application (U2300_TempMonitor.vee)
U2300A Quick Reference Guide
This application continuously monitor up to six analog input
channels, mainly channel 101 to channel 106. The polarity of
these channels are fixed as bipolar and 10 V range. It can
support any U2300A Series models. The DAQ can either be
on a USB port or in a cardcage. However, the present
program can only support one DAQ at a time. The
application uses the temperature coefficients for LM19 and
LM60 temperature sensor from National Semiconductor.
The user can also set either one or both the analog output
channels (201 and 202) to output from 2.4 V to 10 V. The
application also plots the graphs of all the six channels that
can be enabled or disabled at any time. This program uses
the userfunctions imported from "Simple U2300_AI.vee" and
"Simple U2300_AO.vee". It does not use "U2300_AI.vee" and
"U2300_AO.vee" as these programs have complex variable
constants that have the same declaration.
The application starts by importing in the userfunctions
from the two VEE files. The object is located in "Main"
workspace called "Import Libraries"
Once the userfunctions are imported, it will do an
auto- detection for any instrument that is connected to the
computer. The function "InstrAutoDetect ()" will display the
identification and the addresses of the instrument(s) and
prompt the user to select it.
43
Advertisement
