Advertisement
Analog Output (U2300_AO.vee)
U2300A Quick Reference Guide
This is a standalone application that provides control over
the analog output of the U2300A Series DAQ devices. The
user can control up to a maximum of six units of DAQ
within the cardcage or via any USB ports. Users can output
dc voltages, standard waveforms and user- defined waveforms
for analog output channel 201 and 202. The application will
automatically detect the DAQ when it is connected to the pc
via USB port.
The program will initialize all the program variables and
establish communication with the instrument. It will obtain
the serial and model number. It also checks if the attached
U2300A Series DAQ devices support analog output. The
following sequence is that it waits for the user to select DC
voltage generation, standard waveform generation or DC step
generation.
13
Advertisement
