Related Manuals for AREBOS AR-HE-TBM500
Summary of Contents for AREBOS AR-HE-TBM500
- Page 1 User’s manual – A S Bench drill 500W REBO Bench drill 500 W AR-HE-TBM500 Please follow all security measures in this user’s manual to ensure a secure use. Thank you for trusting AREBOS.
-
Page 2: Table Of Contents
User’s manual – A S Bench drill 500W REBO List of contents 1. Safety instructions ............3 1.1 Explanation of the symbols ............3 1.2 Safety rules ................. 4 1.3 Safety work area ................. 4 1.4 Precautions against accident hazards ......... 6 1.5 Residual risks ................ -
Page 3: Safety Instructions
User’s manual – A S Bench drill 500W REBO Please read and safe these instructions. Read through this user’s manual carefully before using this product. Protect yourself and others by observing all safety information, warnings and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. -
Page 4: Safety Rules
User’s manual – A S Bench drill 500W REBO Do not wear gloves. Do not wear long hair loose. Use a hair net. Watch your step! Laser beam! Do not look into the beam! 1.2 Safety rules Keep all safety information and instructions for the future. The term "power tool" used in ... - Page 5 User’s manual – A S Bench drill 500W REBO Connect it to a vacuum cleaner. If there are connections for dust extraction and collection, make sure that they are connected and used correctly. Do not use the cable for purposes for which it is not intended. Do not use the cable to disconnect the plug from the outlet.
-
Page 6: Precautions Against Accident Hazards
User’s manual – A S Bench drill 500W REBO Break long drilling chips by interrupting the drilling process by briefly turning back the turning wheel. There is a risk of injury due to long drilling chips. Keep handles dry, clean and free of oil and grease. Greasy, oily handles are slippery and lead to loss of control. -
Page 7: Technical Data
Keep your hands away from the working area when the machine is in operation. Before carrying out any adjustment or maintenance work, switch off the machine and unplug it from the power supply. 2.Technical Data Model AR-HE-TBM500 Rated input voltage 230 V~/50 Hz Nominal power 500 W (S2 15 min) -
Page 8: Scope Of Delivery
User’s manual – A S Bench drill 500W REBO 3. Scope of delivery... -
Page 9: Construction
User’s manual – A S Bench drill 500W REBO 4. Construction 4.1 Unpacking Open the packaging and carefully remove the device. Remove the packaging material and any packaging and transport locks (if present). Check that the scope of delivery is complete. ... - Page 10 User’s manual – A S Bench drill 500W REBO...
- Page 11 User’s manual – A S Bench drill 500W REBO...
-
Page 12: Clamping The Drill Bit
User’s manual – A S Bench drill 500W REBO 4.3 Clamping the drill bit 4.4 Spindle speed To set the speed of the drill, the belt drive is set to the respective "height". Open the belt case (see 2. Technical data; Fig. 6) by loosening the cross screw. The wing screw is loosened by hand between the motor and the switch for the laser, so that the belt relaxes. -
Page 13: Clamping The Workpiece
User’s manual – A S Bench drill 500W REBO 4.5 Clamping the workpiece... -
Page 14: Test Run
User’s manual – A S Bench drill 500W REBO 4.6 Test run... - Page 15 User’s manual – A S Bench drill 500W REBO...
-
Page 16: Maintenance
User’s manual – A S Bench drill 500W REBO 4.7 Maintenance 5. Intended Use The machine may only be used in a technically perfect condition and in compliance with all safety instructions. This device may only be used as intended. The manufacturer cannot be held responsible for any damage resulting from non-compliance with the provisions of the generally applicable regulations as well as the provisions of these instructions. -
Page 17: Putting Into Service
User’s manual – A S Bench drill 500W REBO Even with proper use and compliance with all safety regulations, residual risks may still exist: Noise emission Dust emission Hand-arm vibrations Risk of burns Tool and workpiece heat up during operation Risk of injury Sharp tools and workpiece edges 6. -
Page 18: Inspection And Maintenance Plan
User’s manual – A S Bench drill 500W REBO 7. Inspection and maintenance plan Regular maintenance period Before each commissioning After each commissioning If necessary Check safety equipment. Check V-belt and tighten if necessary. Lubricate the column and ... -
Page 19: Storage
User’s manual – A S Bench drill 500W REBO 8.4 Storage Store the device and its accessories in a dark, dry and frost-free place that is inaccessible to children. The optimum storage temperature is between 5 and 30˚C. Keep the power tool in its original packaging. - Page 20 Hereby declare that the product named below, seen its design and construction as well as according to our sales, has been complied with the relevant and basic health and safety EU-requirements. Name of the product: Arebos Bench drill 500 W Art. Nr.: 4260551589867 Model Nr.: AR-HE-TBM500...
Need help?
Do you have a question about the AR-HE-TBM500 and is the answer not in the manual?
Questions and answers