3.4 Design 10.2.1 MET/MEV 3.5 Function 10.2.2 MEB 10.3 Exploded-view drawing 4 Preparation for use 10.3.1 ME EX 75 10.3.2 ME EX 100 4.1 Transport and storage 4.2 Assembly and installation 11 Accessories & Spare Parts 4.2.1 Unpacking 4.2.2 Installation 11.1 Brackets...
The company strives to create from FUMEX. This is also applicable to any spare parts work environments free from airborne contaminants. used which do not correspond to the manufacturer’s Our products are manufactured using modern methods specifications.
2.2 Warning levels (on product) The product must not be modified. Safety signs on Fumex products make use of colour The product may only be used in perfect codes and signal words in accordance with ISO 3864-2. technical condition and according to its intended use as described in Section 3.3...
FUMEX ME EX 3 Product Description 3.1 Serial number & product name Refer to the product nameplate. 3.2 Labels and safety signs Safety signs that are missing or illegible must be replaced before the product is used. According to Fig. 1.
FUMEX ME EX 3.3 Area of use 3.5 Function The ME EX extraction arm is an extractor arm for Since the product does not have an internal capturing and extracting gases and dust-filled air in ignition source, it cannot be classified under explosive atmospheres.
Protect the product and its parts from rain, 2. Check for any damage and missing parts. snow, aggressive atmospheres and other Contact a local Fumex representative directly if harmful effects. there is damage or parts are missing. 3. Dispose of the packaging material in accordance with local recycling rules.
Page 8
FUMEX ME EX ME 100 EX ME 75 EX Fig. 7 METS 1500-75 EX METS 2000-75 EX MET 1650-100 EX MET 1900-100 EX MET 2100-100 EX MET 2650-100 EX 13 mm “Click” MEB 1650-100 MEB 1900-100 Fig. 8 Manual...
Page 9
FUMEX ME EX Fig. 9 Fig. 11 Fig. 10 Manual...
FUMEX ME EX 5 Commissioning 6 Operation 5.1 Start-up Ensure that any objects or people that may be electrostatically charged cannot come into 1. Check that all joints are adjusted to the correct contact with the equipment. friction. When extracting different dust combinations, 2.
To avoid damage, the product should be cleaned with a approximate and refer to the time after the first start-up. clean cloth dampened with a neutral detergent. FUMEX recommends the following maintenance schedule: 8.1.1 Dry cleaning Vacuum and dry the product inside and outside.
Temperature limits Please contact FUMEX if you have any questions about Operating temperature: ......5 °C to 60 °C the various types of waste. Ambient temperature: ......10 °C to 40 °C Transport and storage temperature: ..-25 °C to 60 °C...
FUMEX ME EX 11 Accessories & Spare Parts Ø11 (x4) 11.1 Brackets CEILING BRACKET MTI EX Ceiling bracket with internal exhaust duct. Can be supplied in lengths excee- ding 2 metres upon request. ME 75EX Dimensions (mm) Weight ME 100EX...
FUMEX ME EX 11.2 Hoods and suction nozzles DOME HOOD MEK EX Suitable for gases with high lift, completely or partially covering the contaminant source. Temp. range: -15 °C to +80 °C. Material: PE (dissipative) Colour: Black Dimensions (mm) Weight...
FUMEX ME EX 11.3 Other accessories PROTECTIVE GRILLE MESG Stainless steel protective grille to prevent objects from being sucked into the system. Fitted to joints. Temp. range: -15 °C to +80 °C. Dimensions (mm) MESG-50 MESG-75 MESG-100 Ø90 Ø113.5 Ø163 Ø75...
Need help?
Do you have a question about the ME EX and is the answer not in the manual?
Questions and answers