Wireless Charging - FeinTech PLG02400 Manual

Wireless charging

Press power button to turn on the power bank, click again to activate wireless charging.
The wireless charging pad is ready when the green light is on. Place your smartphone in
the centre of the pad. If your smartphone is not charging, you should activate Wireless
Charging or deactivate Fast Wireless Charging in the menu.
Notes:
ƒ
DC and USB-C1 port share one circuit. So these two ports can't work at the same
time.
ƒ
The fast charging function will be stopped once USB-A and USB-C2 are charging at
the same time.
ƒ
To protect the battery life, please unplug the charging cable after fully charged.
ƒ For optimal performance, the powerbank must be used regularly. If this is not the
case, fully charge the power bank at least every three months.
ƒ Run a full charge/discharge cycle at least once every three months to avoid shorten-
ing the life span of the internal battery.
ƒ
If long term storage is likely to occur between uses, we recommend to store at
approximately 50% of full charge.
ƒ
Ensure that the heat generated by the charging process can be released. Ideally,
place the powerbank on a solid, heat-resistant surface during use.
Technical data
Capacity:
DC Input:
TYPE-C input:
USB output:
TYPE-C output1:
TYPE-C output2:
DC Laptop output: 12V/4A | 16.5V/4A | 20V/4A | 24V/3.5A
Wireless charging: 10W
Size
Net weight
*USB Programmable Power Supply for supported devices
88.8Wh / 24Ah @3.7V/24000mAh
12–24V / 2A (max)
DC5V/3A | 9V/3A | 12V/3A | 15V/3A | 20V/3A
5V/4.5A |4.5V/5A | 9V/2A | 12V/1.5A
DC 5V/3A | 9V/3A | 12V/3A | 15V/3A | 20V/3A
DC 5V/3A | 9V/2A | 12V/2.25A (PPS*:3.3–11V/3A)
122×122×28mm
500g