Hisense RF27A3FSE User's Operation Manual page 6

6
Door Removal
In case your home access door is too
narrow for the refrigerator to pass through,
remove the refrigerator doors and drawers.
If you do not need to remove the appliance
doors, proceed to 'Installing Water Lines'
on page 8.If you need to remove the doors,
continue below.
Tools you will need(Not provided):
Allen Wrench (4mm)
Philips Screwdriver
1.With the door closed, remove the 3
screws holding the top cover (A) with
Philips (+) screwdriver, and then remove
the top cover with the entire-harness
attached.
2. Remove the screws (B) fixed on the
hinges with a wrench (8mm)and 1 ground
screws(C) attached to the hinge with
Philips (+) screwdriver. Remove the upper
left and right door hinges(D).
3.Use your both hands to open the door
more than 90°.Lift it up and take it off.
4.Remove the 4 hex head bolts hinges (E)
Wrench(8mm)