Subscribe to Our Youtube Channel
Related Manuals for LOFTNESS Battle Ax H Series
Summary of Contents for LOFTNESS Battle Ax H Series
- Page 1 Battle Ax H Series Skid Loader Mulching Head Owner’s Manual and Parts Book (Originating with Serial Number 104-101) Model Number: Serial Number: Date of Purchase: 208522 Rev. A 08.26.21...
- Page 3 All Loftness products have a one (1) year limited warranty. The XLB10 Grain Bag Loader has a two (2) year limited warranty. If any Loftness product is used as rental or leased equipment the limited warranty period is for only 30 days from the delivery date to the original customers.
- Page 5 ____ Assisted customer with completing / submitting Warranty Registration Form to Loftness by one of the below options. Dealer also needs to submit a copy of this completed PDI to Loftness and maintain the copy in owner’s manual for unit.
- Page 7 ____ Assisted customer with completing / submitting Warranty Registration Form to Loftness by one of the below options. Dealer also needs to submit a copy of this completed PDI to Loftness and maintain the copy in owner’s manual for unit.
-
Page 9: Table Of Contents
Battle Ax H Series Identification ........ - Page 10 Battle Ax H Series Covers, Skids, Manual Holder ....... . .
- Page 11 Metric Hardware and Lock Nuts ..........68 Battle Ax H Series OM...
- Page 12 Battle Ax H Series OM...
-
Page 13: Ordering Code
Ordering Code Ordering Code Battle Ax H Series (Example) The ordering code will consist of two numbers (machine size), two letters (machine type), one letter (tooth type), two numbers (motor system), one letter (sprocket/belt combo), one number (threshold setting), and one letter (options). An example for a Battle Ax of this type would be as shown below. - Page 14 Battle Ax H Series OM...
-
Page 15: Introduction
Proper operation and maintenance are essential to prevent injury or damage and to maximize machine life. The Loftness Battle Ax is an effective, reliable machine used for maintaining grass, weeds, brush and trees. Efficiently cuts and mulches up to 6" diameter material. -
Page 16: Battle Ax H Series Features
Introduction Battle Ax H Series Features • Power Requirement - 90 to 150HP • Downward Rotation Design • Premium Strength Steel Body & Rotor • Front Mounted • Hydraulic Driven • Universal Skid Steer Mount - Other Mounts Available •... -
Page 17: Safety Instructions
Safety First Be certain all machine operators are aware of the dangers indicated by safety decals applied to the machine, and be certain they follow all safety decal Safety Alert Symbol instructions. Contact Loftness for safety decal replacement. This message alert... -
Page 18: Safety Rules
(if equipped), • Make sure the operator’s area is clear of any when operating the attachment. distracting objects. Keep work areas clean and free of grease and oil to avoid slipping or falling. Battle Ax H Series OM... -
Page 19: Hydraulic Safety
Operators are responsible to be aware of safety hazard areas and follow instructions on warning, caution, or danger decals applied to the machine. • Know the area before operating the machine. Be aware of power lines or other equipment. Battle Ax H Series OM... -
Page 20: Safety Decal Locations
For all machine decals see “Machine Decals and Signs” on page Part No. N17013 Part No. N68716 Part No. N20661 Part No. N68724 Part No. 200491 Part No. 4256 Part No. 203264 Battle Ax H Series OM... - Page 21 Instructions and Pressure Ratings that apply to the components used on this unit. The dealer/owner will be responsible for any damage caused by improper connection to the power unit. Part No. N28385 Part No. N28386 Battle Ax H Series OM...
- Page 22 Safety Instructions Safety Decal Locations (Cont’d) Part No. 4334 Part No. N29769 Part No. N17014 Battle Ax H Series OM...
-
Page 23: Battle Ax H Series Identification
Safety Instructions Battle Ax H Series Identification Pusher Bar Drive Belt Cover Fixed Pusher Model Drive Sprocket Hydraulic Cylinder Shipping Bar Drive Belt (remove before operating) Left Skid Rotor Sprocket Rotor Manual Holder Compartment Cutting Teeth Right Skid Right Pusher... - Page 24 Battle Ax H Series OM...
-
Page 25: Set-Up Instructions
Loosen nuts at locations 3 and 4. Then remove nut (5), bolt (6), and washer (7) securing the rear arm (8) to the rear of the frame. Repeat procedure on the opposite side of the Battle Ax. (Procedure continued on following page.) Battle Ax H Series OM... -
Page 26: Remove Shipping Stand
(1) with the desired hole (A ,B, or C) on the pusher bar side assembly. Reinstall all hardware and tighten (2, 3, and 5) securely. This must be done on both sides. Remove lifting device. Battle Ax H Series OM... -
Page 27: Installing The Battle Ax To The Loader
* Hydraulic pusher bar models only. IMPORTANT: It is the owner’s responsibility to assure that the hydraulic hoses from the power unit to the attachment are not caught in pinch points, or in any way damaged by moving parts. Battle Ax H Series OM... -
Page 28: Flushing Loop (#41 Closed Motor Models Only)
Make sure all connections are tight. Start loader and engage the hydraulics. Raise the Battle Ax off the ground and place blocks (1) underneath the skids. Lower the Battle Ax down on the blocks. (Procedure continued on following page.) Battle Ax H Series OM... -
Page 29: Checking Rotor Speed
Turn power off from loader and return the belt cover to position, securing with the eight bolts. Battle Ax H Series OM... -
Page 30: Skid Adjustment
FAILURE TO DO SO COULD RESULT IN SEVERE DAMAGE TO THE MACHINE!. Battle Ax H Series OM... -
Page 31: Operating Instructions
WARNING: Do not operate the attachment above the rated RPM. Check with your Slowly increase engine speed to high idle. Loftness dealer to be sure your attachment is Move the loader and Battle Ax forward and begin mowing. set-up with the correct sprockets to match... -
Page 32: Clearing Jams
Lower the lift arms and position the log between push bar extensions and the Battle Ax. Move the loader backwards, dragging the log to the desired location. Battle Ax H Series OM... -
Page 33: Maintenance
NOTE: Lubricate the grease point every “X” hours indicated on the decal adjacent to the grease Rotor Bearing point. Teeth Belt Tension See “Battle Ax H Series Identification” on page 11 for Every Drive Belt component location and identification. Safety Labels (Procedure continued on following page.) - Page 34 Pusher arm may need to be tilted forward NOTE: Rotor bearings cannot be damaged by over- to access. greasing. Lubricate the fittings until a small Every 50 hours of operation. Interval: amount of grease is purged from the bearing. Battle Ax H Series OM...
-
Page 35: Overhung Load Adapter
To remove the cover (1), unscrew the six bolts (2) and lift the cover off of the frame. When maintenance/repairs are complete, return the cover(s) back into position and tighten and secure all bolts. Battle Ax H Series OM... -
Page 36: Removing Motor Cover
(3) at the rear. back into position and tighten and secure all bolts. When maintenance/repairs are complete, return the cover(s) back into position and tighten and secure all bolts. Battle Ax H Series OM... -
Page 37: Skid Replacement
Retighten the jam nut (3). Retighten overhung load adapter support bolts (1) and the mounting bolts (2). Battle Ax H Series OM... -
Page 38: Replacing Belt
10. Re-torque screws after hammering. 11. Recheck screw torque after initial run-in, and periodically thereafter, repeat steps 4, 5 & 6 if loose. 12. Check alignment of the sprocket. Repeat sprocket removal and assembly procedures if necessary. Battle Ax H Series OM... -
Page 39: Tooth Removal And Installation
NOTE: The teeth can either be removed from the (Procedure continued on following page.) attachment or remain installed for sharpening. WARNING: Rotor must be stabilized to prevent accidental rotation any time the rotor is exposed for service work. Battle Ax H Series OM... -
Page 40: Storage
Replace all damaged, worn or missing decals. • Install the Battle Ax on a loader and test for proper operation. WARNING: DO NOT allow ANY people or animals within 300 feet of the work area while operating this machine. Battle Ax H Series OM... -
Page 41: Motor & Sprocket Selection Chart
2131-1744 2033-1663 2068-1692 40 Top Sprocket N38491 90cc - 110cc 48 Bottom Sprocket N38492 41,48 207679 2103-1721 (5.4921ci - 6.71ci) 1568 Synchronous Belt N34646 Model Code “J” 2138-1749 2173-1778 (High Speed chart on following page.) Battle Ax H Series OM... -
Page 42: High Speed
2168-1774 2206-1804 40 Top Sprocket N38491 90cc - 110cc 45 Bottom Sprocket N47578 41,48 207679 2244-1836 (5.4921ci - 6.71ci) 1568 Synchronous Belt N34646 Model Code “I” 2281-1866 2318-1897 (Variable Motor Setting chart on following page.) Battle Ax H Series OM... -
Page 43: Variable Motor Settings
Faulty rotor bearing. Replace bearing(s). Belt damaged. Replace belt. Belt slipping. Clean or replace belt. Adjust tension. Oil Leak At Hydraulic Control Valve Pinched case drain hose. Check hose. Cover. Disconnected case drain hose. Reconnect hose. Battle Ax H Series OM... - Page 44 Battle Ax H Series OM...
-
Page 45: Parts Identification
Parts Identification PARTS IDENTIFICATION Battle Ax H Series OM... -
Page 46: Battle Ax H Series Covers, Skids, Manual Holder
Parts Identification Battle Ax H Series Covers, Skids, Manual Holder Battle Ax H Series OM... - Page 47 Parts Identification Battle Ax H Series Covers, Skids, Manual Holder QTY. PART # DESCRIPTION 207220 COVER, MOTOR W/DECALS N37756 WASHER, NORD-LOCK 3/8" SP 4195 BOLT, 3/8" X 1" GRADE 5 207273 COVER, CENTER 207253 PLATE, BULKHEAD 207271 COVER, LEFT BEARING...
-
Page 48: Battle Ax H Series Cutter Bar, Deflector Chains, Stand, And Belt Adjustment
Parts Identification Battle Ax H Series Cutter Bar, Deflector Chains, Stand, and Belt Adjustment Battle Ax H Series OM... - Page 49 Parts Identification Battle Ax H Series Cutter Bar, Deflector Chains, Stand, and Belt Adjustment QTY. PART # DESCRIPTION N21496 BOLT, 1" X 2" GR 8 FN TH N68757 STAND, W/DECALS 4166 WASHER, 1" LOCK 4490 NUT, 1"-14UNF STANDARD 4375 PIN, ROLL 3/16" X 1"...
-
Page 50: Pusher, Fixed
BOLT, 1-14 X 5" GR. 8 FN. THR 4166 WASHER, 1" LOCK 4490 NUT, 1"-14UNF STANDARD 207171 PUSHER, 88 W/DECALS 207211 TUBE, PUSHER SHORT W/BUSHING N28583 BOLT, 1 X 6" FN TH GR 8 4356 WASHER, 1" FLAT 207334 BUSHING, FIXED PUSHER Battle Ax H Series OM... -
Page 51: Pusher, Hydraulic
BOLT, 1-14 X 5" GR. 8 FN. THR 200796 TEE, BULKHEAD -6 MJIC N24780 NUT, LOCK BULKHEAD -6 207253 PLATE, BULKHEAD 4195 BOLT, 3/8" X 1" GRADE 5 N16470 WASHER, 3/8 NORDLOCK 207326 CYLINDER, 2.25BORE 1.5ROD 14ST Battle Ax H Series OM... -
Page 52: Belt And Sprocket Options
207280 BELT ASSY, 37MM D 207189 BELT ASSY, 37MM H 207281 BELT ASSY, 37MM I 207282 BELT ASSY, 37MM J 208429 BELT ASSY, 37MM T 207283 BELT ASSY, 37MM U 207285 BELT ASSY, 37MM V Battle Ax H Series OM... -
Page 53: Belt Assembly, 48T 38B 37Mm 1568 - Code "A" (207284)
BELT, POLY CHAIN 14MM 1568 X 37 200499 KEY, 5/8" X 2-1/4" 7121-03 KEY, 3/8" X 2" 207190 BUSHING, TPLK 2-1/2 3020 N20805 BUSHING, 1-1/2" TPL 3020 N38490 SPROCKET, 14MM 38 TOOTH 37 N38492 SPROCKET, 14MM 48 TOOTH 37 Battle Ax H Series OM... -
Page 54: Belt Assembly, 45T 40B 37Mm 1568 - Code "B" (207279)
BELT, POLY CHAIN 14MM 1568 X 37 200499 KEY, 5/8" X 2-1/4" 7121-03 KEY, 3/8" X 2" 207190 BUSHING, TPLK 2-1/2 3020 N20805 BUSHING, 1-1/2" TPL 3020 N38491 SPROCKET, 14MM 40 TOOTH 37 N47578 SPROCKET, 14MM 45 TOOTH 37 Battle Ax H Series OM... -
Page 55: Belt Assembly, 45T 43B 37Mm 1568 - Code "D" (207280)
BELT, POLY CHAIN 14MM 1568 X 37 200499 KEY, 5/8" X 2-1/4" 7121-03 KEY, 3/8" X 2" 207190 BUSHING, TPLK 2-1/2 3020 N20805 BUSHING, 1-1/2" TPL 3020 N34647 SPROCKET, 14MM 43 TOOTH 37 N47578 SPROCKET, 14MM 45 TOOTH 37 Battle Ax H Series OM... -
Page 56: Belt Assembly, 43T 45B 37Mm 1568 - Code "H" (207189)
BELT, POLY CHAIN 14MM 1568 X 37 200499 KEY, 5/8" X 2-1/4" 7121-03 KEY, 3/8" X 2" 207190 BUSHING, TPLK 2-1/2 3020 N20805 BUSHING, 1-1/2" TPL 3020 N47578 SPROCKET, 14MM 45 TOOTH 37 N34647 SPROCKET, 14MM 43 TOOTH 37 Battle Ax H Series OM... -
Page 57: Belt Assembly, 40T 45B 37Mm 1568 - Code "I" (207281)
BELT, POLY CHAIN 14MM 1568 X 37 200499 KEY, 5/8" X 2-1/4" 7121-03 KEY, 3/8" X 2" 207190 BUSHING, TPLK 2-1/2 3020 N20805 BUSHING, 1-1/2" TPL 3020 N47578 SPROCKET, 14MM 45 TOOTH 37 N38491 SPROCKET, 14MM 40 TOOTH 37 Battle Ax H Series OM... -
Page 58: Belt Assembly, 40T 48B 37Mm 1568 - Code "J" (207282)
BELT, POLY CHAIN 14MM 1568 X 37 200499 KEY, 5/8" X 2-1/4" 7121-03 KEY, 3/8" X 2" 207190 BUSHING, TPLK 2-1/2 3020 N20805 BUSHING, 1-1/2" TPL 3020 N38492 SPROCKET, 14MM 48 TOOTH 37 N38491 SPROCKET, 14MM 40 TOOTH 37 Battle Ax H Series OM... -
Page 59: Belt Assembly, 50T 35B 37Mm 1568 - Code "T" (208429)
208430 KEY, 1/2 X 5/8 X 1.75 LONG 7121-03 KEY, 3/8" X 2" 206657 BUSHING, 2-1/2IN TPL 2517 N20805 BUSHING, 1-1/2" TPL 3020 203001 SPROCKET, 14MM 35 TOOTH 37 N38471 SPROCKET, 14MM 50 TOOTH 37 Battle Ax H Series OM... -
Page 60: Belt Assembly, 48T 37B 37Mm 1568 - Code "U" (207283)
208430 KEY, 1/2 X 5/8 X 1.75 LONG 7121-03 KEY, 3/8" X 2" 206657 BUSHING, 2-1/2IN TPL 2517 N20805 BUSHING, 1-1/2" TPL 3020 203003 SPROCKET, 14MM 37 TOOTH 37 N38492 SPROCKET, 14MM 48 TOOTH 37 Battle Ax H Series OM... -
Page 61: Belt Assembly, 48T 40B 37Mm 1568 - Code "V" (207285)
BELT, POLY CHAIN 14MM 1568 X 37 200499 KEY, 5/8" X 2-1/4" 7121-03 KEY, 3/8" X 2" 207190 BUSHING, TPLK 2-1/2 3020 N20805 BUSHING, 1-1/2" TPL 3020 N38491 SPROCKET, 14MM 40 TOOTH 37 N38492 SPROCKET, 14MM 48 TOOTH 37 Battle Ax H Series OM... -
Page 62: Rotor Assembly, 88" With Carbide Tooth (207150)
207153 MOUNT, 2-1/2 BEARING WELDMENT 207183 ANTIWRAP, CARBIDE 11, 2.5 BRG" N21464 WASHER, 3 1/2"OD BRNG RET. 4076 WASHER, 1/2" EXT CNTSK LOCK 4468 BOLT, 1/2-20UNF X 1-1/4 FL HD 207151 ROTOR, 88" BH W/CARBIDE Battle Ax H Series OM... -
Page 63: Rotor, 88" With Carbide Tooth (207151)
BOLT, SHCS 5/8 X 2-1/4 FN GR 8 207155 WASHER, DRIVE 2.500 BOLT-ON 207154 ROTOR, 88 BH W/O CUTTER N49090 TOOTH, BATTLE AX CARBIDE N16474 WASHER, 3/4 NORDLOCK N21308 BOLT, 3/4" X 3" FN THRD GR 8 207156 WASHER, DRIVEN 2.500 BOLT-ON Battle Ax H Series OM... -
Page 64: Motor Assemby, #41 Closed 6000Psi (207201)
N20818 ELBOW, 90DEG 16MJIC-16 CODE 62 N28903 ELBOW, 90DG TUBE 16MJIC-16FJIC N19271 ADAPTER, 16MJIC - 16FJIC SWVL N19272 TEE, 16MJIC-16FJIC-16MJIC N30420 ADAPTER, -16MJIC -6MJIC N37279 TEE, -6MJIC-6FJIC-6MJIC N19270 ELBOW, 90 DEG - 16MJC - 16FJC Battle Ax H Series OM... - Page 65 BOLT, 1/2" X 4" GRADE 5 N11952 ELBOW, 90 DEG - 08MJIC - 08MOR N157054 VALVE, RELIEF 100PSI 4001 BOLT, 1/4" X 1-3/4" GRADE 5 3183 WASHER, FLAT 1/4" 4050 NUT, 1/4" LOCK N11953 TEE, 8MJIC-8MOR-8MJIC N21385 CAP, 8FJIC Battle Ax H Series OM...
-
Page 66: Motor Assemby, #48 6000Psi (207828)
Parts breakdown of item 27 (207679) is on page 57. Parts breakdown of item 28 † (200655) is on page 59. Tank - 3 Pressure - 3 9 - To Pressure Gauge 33,34,35 30,18 † 27** Battle Ax H Series OM... - Page 67 BOLT, 1/2" X 4" GRADE 5 N11952 ELBOW, 90 DEG - 08MJIC - 08MOR N157054 VALVE, RELIEF 100PSI 4001 BOLT, 1/4" X 1-3/4" GRADE 5 3183 WASHER, FLAT 1/4" 4050 NUT, 1/4" LOCK N11953 TEE, 8MJIC-8MOR-8MJIC N21385 CAP, 8FJIC Battle Ax H Series OM...
-
Page 68: Overhung Load Adapter (200959)
PLATE, FRONT REAR N28447 SEAL, FRONT SHAFT OHLA 200966 BEARING, SPHERICAL 65MM X 120MM 200960 BODY, OHLA 4105 GREASE-ZERK, 1/4" SCREW-IN 200961 SHAFT, OHLA SPLINE 1.50 200967 ADAPTER, OHLA C-D N28529 BOLT, SHCS 1/2" X 1-1/2" Battle Ax H Series OM... -
Page 69: Hydraulic Motor, Variable 90Cc To 110Cc (207679)
SEAL KIT (Includes Items 1, 2, 3, and 4) O-RING 194.1 X 3 V80 / 220 X 3 V80 O-RING 144.5 X 3 V70 / 168 x 3 V70 SHAFT SEAL 60 X 80 X 6 O-RING 114.5 X 3 V80 Battle Ax H Series OM... -
Page 70: Manifold, Closed Loop Flushing (200699)
QTY. PART # DESCRIPTION N28286 PLUG, 6MOR HEX 207115* CARTRIDGE, SHUTTLE HOT OIL 207116** VALVE, RELIEF 207139 KIT, SEAL (Not Shown) - for cartridge 207115 207140 KIT, SEAL (Not Shown) - for relief valve 207116 Battle Ax H Series OM... -
Page 71: Manifold, Relief 5000 Psi, Check (200655)
Parts Identification Manifold, Relief 5000 PSI, Check (200655) QTY. PART # DESCRIPTION N28099 VALVE, RELIEF 5000PSI N14118 PLUG, 6MOR HEX 200695 VALVE, CHECK Battle Ax H Series OM... -
Page 72: Pressure Gauge
FLANGE, MOUNT GAUGE N16133 NUT, NYLON INSERT #8 N16331 FLANGE, MOUNT GAUGE #8 N16335 FLANGE, MOUNT #10 N16333 BOLT, BHCS #10-32 X 1 N16334 NUT, NYLON INSERT #10 N16162 ELBOW, 1/4" BLK 90 DEG STREET Battle Ax H Series OM... -
Page 73: Machine Decals And Signs
Check and replace any worn, torn, hard to read or missing decals on your machine. Part No. N68716 Part No. N17013 Part No. N28386 Part No. N20661 Part No. N17014 Part No. 4334 Part No. 203264 Battle Ax H Series OM... - Page 74 Part No. 200491 Part No. N23506 WARNING SKIN PUNCTURE HAZARD. HYDRAULIC LINES. Protect hands and body from high pressure fluids. N23506 Part No. N29769 Part No. N68724 Part No. N28010 Part No. 4256 Part No. 207851 Battle Ax H Series OM...
- Page 75 Parts Identification Machine Decals and Signs (Cont’d) Part No. N13721 Part No. N33105 Part No. N13517 Part No. 4138 Part No. N26973 Part No. N28576 Part No. 200249 Battle Ax H Series OM...
- Page 76 Parts Identification Battle Ax H Series OM...
-
Page 77: Appendix
Double Carbide Teeth Quadco Planer Teeth, Sharpenable (Optional) Quadco Planer Teeth Hardened (Optional) Skid Shoes Adjustable .5 in. (1.3 cm) Above Grade to 1.5 in. (3.8 cm) Below Grade Deflector Steel Chain Anti-Wrap Protection Bearing Battle Ax H Series OM... -
Page 78: Dimensions
Overall Length (B) 36.30 in. (92.20 cm) Cutting Width (C) 93.625 in. (237.80 cm) Overall Width (D) 101.50 in. (257.81 cm) Number Of Knives Weight 3,816 lb. (1730 kg) Crated Weight 3,990 lb. (1809 kg) Battle Ax H Series OM... -
Page 79: Torque Specifications
Appendix Torque Specifications Inches Hardware and Lock Nuts Battle Ax H Series OM... -
Page 80: Metric Hardware And Lock Nuts
Appendix Torque Specifications (Cont’d) Metric Hardware and Lock Nuts Battle Ax H Series OM... - Page 82 Loftness Specialized Equipment, Inc. 650 So. Main Street • PO Box 337 • Hector, MN 55342 Tel: 320.848.6266 • Fax: 320.848.6269 • Toll Free: 1.800.828.7624 Printed in USA © Loftness 2021...
Need help?
Do you have a question about the Battle Ax H Series and is the answer not in the manual?
Questions and answers