Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Memphis MME10TSP
- Page 1 MME10TSP & MME10T24 MARINE GRADE BASS SYSTEM & ENCLOSURE MEMPHIS MARINE...
-
Page 2: Specifications
MME10TSP & MME10T24 Memphis Audio built a 50 year legacy in the audio industry by engineering the highest quality products to produce the best possible listening experience for our fans and loyal supporters. To fully appreciate our products we recommend taking the time to read and follow the instructions in this manual. As always, we recommend all the installations and services to be performed by an authorized Memphis Audio dealer. -
Page 3: Installation Information
Take time to inspect the area you plan on installing your Memphis Marine Enclosure. Check the area for any potential hazards like electric lines, fuel lines, hydraulic lines or any other potential hazards. - Page 4 MME10TSP POWERED ENCLOSURE ONLY! Install the fuse at the battery last! Use conventional stranded copper wire for all connections. Tinned Copper Memphis marine grade wire is recommended for corrosion resistance in powersports and marine applications. Finish the ends of the wires at the amp and vehicle with proper size terminals.
-
Page 5: Wiring Instructions
Wiring Instructions RED WIRE The RED wire should be connected directly to the battery’s positive terminal and fused with a 30A fuse. BLACK WIRE The BLACK wire should be directly connected to the battery’s negative terminal BLUE WIRE The BLUE wire needs to be connected to 12v+ accessory circuit of your vehicle or remote turn-on out put of your source/head unit. - Page 6 Once you have your MME10T24 connected to your amplifier, you can now adjust your impedance using the included Memphis FLEX Selectable Impedance Technology terminal located on the back of the enclosure. This simple system allows you to effortlessly adjust your impedance to maximize your systems performance by adjusting the color coded jumper cables to a predefined location on the terminal.
- Page 7 FEET INSTALLATION Your Memphis Marine Enclosure includes (4) rugged feet. Align the feet with the pre-drilled threaded holes on the unit. Each foot will use 2 Allen head bolts and 2 washers. Align the first washer with the first hole in the foot and insert the screw and hand tighten.
-
Page 8: Warranty
Memphis Audio will not be responsible for damages incurred in shipment or due to improper packaging materials used by the purchaser. If determined to be within warranty your product will be repaired or replaced at the discretion of Memphis Audio. Service/Returns Please consult with your local authorized dealer if you experience issues with your unit. - Page 9 800.489.2300 @MEMPHISAUDIO www.memphiscaraudio.com @MEMPHISCARAUDIOUSA 122 Gayoso Ave. Memphis,TN, USA...