Space 28004 Operating Instructions

7
support du dossier support du dossier
4R
8, 11
10
3
Dessin Détaillé A:
Installer le support du dossier dans la plaque
de siège.
10
ÉTAPE 1 Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et s'assurer que les
quantités des pièces reçues sont correctes.
ÉTAPE 2 Pour commencer le montage, insérer les roulettes (1) dans le piétement (2) et glisser le vérin pneumatique (3) sur le piéte-
ment (2).
ÉTAPE 3 Attacher les accoudoirs (4R et 4L) au coussin du siège (6), en utilisant six vis de 1 3/8 po (8) et rondelles (11). Attacher la
plaque du siège (5) au coussin du siège (6) en utilisant quatre vis longues de 7/8 po (9).
ÉTAPE 4 Glisser le dossier de siège (7) dans le support de la plaque du siège (5) et attacher en utilisant trois vis courtes de 5/8 po
(10). SERRER COMPLÈTEMENT TOUTES LES VIS.
ÉTAPE 5 Placer le siège assemblé sur le dessus du vérin pneumatique (3) et pousser vers le bas.
ATTENTION: S'ASSURER D'AVOIR SERRÉ COMPLÈTEMENT TOUTES LES VIS.
28004/29008 CHAISE DE PRÉSIDENT AVEC
SOUTIEN LOMBAIRE RENFORCÉ
INSTRUCTIONS DE MONTAGE
9
4L
8,11
6
5
10
Pièce . . . . . . . . . . . . . . . Qté
1. Roulettes . . . . . . . . . . . . . . . 5
2. Piétement . . . . . . . . . . . . . . . 1
3. Vérin pneumatique . . . . . . . . . . 1
4. Accoudoirs droit (4R) et gauche (4L) 2
5. Plaque du siège . . . . . . . . . . . . 1
6. Coussin du siège . . . . . . . . . . . 1
7. Dossier du siège. . . . . . . . . . . . 1
8. Vis de 1 3/8 po. . . . . . . . . . . . . 6
9. Vis de 7/8 po (longues) . . . . . . . . 6
10. Vis de 5/8 po (courtes)
11. Rondelles. . . . . . . . . . . . . . . 6
2
1 12. Clé Allen (non montrée) . . . . . . . 1
© Office Star Products Mai 2003
3
1
. . . . . . . 3
WARRANTY
SPACE chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• We can not warrant leather against routine scratching and scuffing, as all leather is subject to minor blemishes in
normal use.
To make a warranty claim, contact Parts Deptartment. Provide model number and description of the problem and obtain return authorization. At it's
option Office Star Products will: a.) Supply compatible components of current manufacture. b.) Repair the customer's component. The customer
must prepay freight on any components returned to the factory. Return freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing
250 lbs. or less. This warranty does not cover labor, freight or damages caused by neglect, abuse, misuse, alterations or damage caused during
shipment or by fire, flood or other natural disaster.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are
damaged or missing. Our customer Parts Department will do everything possible to promptly remedy the problem. Contact us via email
parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific
Time.
28004/29008 SUPER LUMBAR MANAGERS CHAIR
OPERATING INSTRUCTIONS
FEATURE
2900-8
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and pull lever (1)
up. To lower seat height sit on chair and pull lever (1) up.
• SYNCHRO TILT
To lock return chair to the upright position and push lever
(1) in. To unlock pull lever (1) out.
• TILT ADJUSTMENT
For individual comfort, this chair has been equipped
with an adjustment that will allow the user to change the
tension of the tilting feature. Turn knob (2) clockwise to
increase tension and counter-clockwise to decrease or
ease the tension.
NOTE: Be careful not to loosen back tilt adjustment knob
completely.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (3) in to allow the arms
to move up or down freely. Release the button (3) once the
desired height is reached.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts, screws, and knobs
2
are securely tightened.
3. Check that all bolts, screws, and knobs are tight every
three months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic
2800-4
cover as head covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.