Functional Overview; Front Panel; Rear Panel - Philips BDP3506/F7 User Manual

Blu-ray disc player
Hide thumbs Also See for BDP3506/F7:
Table of Contents

Advertisement

3.

FUNCTIONAL OVERVIEW

3.1. Front Panel

1
* The unit can also be turned on by pressing these
buttons.
1. Disc tray
• Place a disc after opening the disc tray.
2. Infrared sensor window
• Receives signals from your remote control so that
you can control the unit from a distance.
3. A (open/close) button*
• Press to open or close the disc tray.
4. C (stop) button
• Press to stop playback.
5. B (play) button*
• Press to start or resume playback.
• This button lights up during playback.
6. Q (standby/on) button
• Press to turn on the unit, or to switch the unit into
standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)
• Press and hold for 10 seconds to shut down the unit.
• This button lights up when the power is on and turns
off when the unit is in standby mode.
7. SD card slot
• Insert an SD card and play back the contents in it.
D Note
Due to new ENERGY STAR® requirements, this unit
will automatically enter standby mode after 25 minutes
of inactivity.

3.2. Rear Panel

1
2
3*
4 5*
6
7
1. AC power cord
2. HDMI OUT jack
3. LAN terminal
4. AUDIO OUT jacks
5. DIGITAL OUT (COAXIAL) jack
6. VIDEO OUT jack
C Caution
2
3
4 5
6
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
turn off the unit.
• Use to connect to a display with an HDMI compatible
port with an HDMI cable.
• Use to connect to network provisioning equipment
such as a router or a modem with a LAN cable.
• Use to connect a TV monitor, an AV receiver /
amplifier or to another device with an audio cable.
• Use to connect an AV receiver / amplifier,
Dolby Digital / DTS decoder or to another device
with a digital audio coaxial input jack with a digital
audio coaxial cable.
• Use to connect a TV monitor, an AV receiver /
amplifier or to another device with a video cable.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
This unit does not have an RF modulator.
EN - 11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bdp3506Bdp3506/f8

Table of Contents