Table of Contents
Advertisement
'
To cancel the current timer setting, move the
cursor to { CANCEL } and press OK.
Helpful hints:
– If you have entered a wrong selection, press pqtu to
reselect the setting that you want to change.
5
Press pq to go to another item on the list and press
OK if you want to setup more timer recordings. Move
to { EXIT } and press OK to exit the Timer Record list.
'
To change an existing timer setting, press pq to
highlight the selection and press OK.
To add a new timer recording, press pq to select
'New Timer Program' and press OK.
6
Press STANDBY-ON to turn off the DVD Recorder.
'
The DVD Recorder must be in standby mode in
order for the timer recording to occur.
Helpful hints:
– To stop recording during Timer Record, press STOP
¢. This may take a few seconds for the recording to
stop.
– To check the recording status while Timer Record is
active, press DISPLAY to toggle on the Timer Record
information on the screen.
– When the Timer Record function is active, the 'TIMER
'LED on the local display will be illuminated.
About 'VPS/PDC' function
'VPS' (Video Programming System)/'PDC' (Programme
Delivery Control) signal are transmitted with TV
programmes in some broadcast systems. These signals
ensure that timer recordings are made regardless of any
broadcast delays, early starts, or broadcast interruptions.
The DVD Recorder will turn on or off at the correct time.
Timer Recording using S
The S
V
system is a feature that makes the timer
HOW
IEW
setting simpler.
1
Press TIMER on the remote control.
'
The Timer Record overview appears.
4
Move the cursor to highlight { OK }. Press OK to save
the setting and go back to the Timer Record list.
5
Press pq to go to another item on the list and press
OK if you want to setup more timer recordings. Move
to { EXIT } and press OK to exit the Timer Record list.
V
System
HOW
IEW
2
Press pqtu on the remote control to select
{ S
V
} and press OK to confirm the selection.
HOW
IEW
'
You may also press S
control.
3
Press pqtu on remote control to select an item to
change and press OK.
{ Repeat }
– Select {Once}, {Weekly}, {Daily}. Press OK to
confirm selection.
{ HDD/DVD }
– Select recording target. Press OK to confirm
selection.
{ Quality }
– Select recording quality {HQ}, {SP}, {SPP}, {LP}, {EP}
or {SLP}. Press OK to confirm.
{ S
V
}
HOW
IEW
– Enter the S
V
HOW
IEW
{ Sound }
– This setting is only applicable if {TV} is selected in the
{SOURCE} mode. Select {Stereo}, {Main}, {SAP} or
{Mono}. Press OK to confirm.
{ PDC }
Sets the PDC/VPS function. Press OK to confirm.
–
See "About the PDC/VPS function" below.
Helpful hints:
– To go back to normal Timer Record menu, move to
{Date/Time Setting} and press OK.
'
You may press TIMER again to exit the timer
recording list.
6
Press STANDBY-ON to turn off the DVD Recorder.
'
The DVD Recorder must be in standby mode in
order for the timer recording to occur.
V
on the remote
HOW
IEW
code. Press OK to confirm.
2
Advertisement
Table of Contents
