Judge J417 Instruction Manual page 6

Add Weigh/Tare Mode Function
Note: Tare Mode can only be used if the total initial load
is greater than 200g.
Add Item A
Add Item B
Tare mode allows you to weigh
consecutive items without
removing the previous item
from the scale.
1. Place Item A into the bowl.
Weight of Item A is displayed.
2. Short Press the
to activare Tare Mode and
reset the LCD to '0'
3. Place Item B in the bowl.
Weight of Item B is displayed.
4. Short Press the
again.
Total weight of both
Item A and Item B is displayed.
5. Short Press the
button again to continue
adding items.
button
button