Remote control
This section includes an overview of the remote
control.
Overview
Control your home theater with the remote
control.
a
(Standby-On)
•
Switch the home theater on or to
standby.
•
When EasyLink is enabled, press
and hold for at least three seconds
to switch all connected HDMI CEC
compliant devices to standby.
(Home)
b
Access the home menu.
c
Source buttons
•
DISC/POP-UP MENU: Access or exit
the disc menu when you play a disc.
•
RADIO: Switch to FM radio.
•
AUDIO SOURCE: Select an audio
input source.
d
TOP MENU
Access the main menu of a video disc.
EN
10
a
BACK
•
Return to a previous menu screen.
•
In radio mode, press and hold to erase
the current preset radio stations.
Navigation buttons
b
•
Navigate menus.
•
In radio mode, press left or right to
start auto search.
•
In radio mode, press up or down to
tune the radio frequency.
c
OPTIONS
•
Access more play options while playing
a disc or a USB storage device.
•
In radio mode, set a radio station.
d
OK
Confirm an entry or selection.
a
(Stop) /
(Eject/Open/Close)
•
Stop play.
•
Press and hold for three seconds to
open or close the disc compartment,
or eject the disc.