Notes On Documentation; Ce Labelling; Storing The Documents; Symbols Used In These Operating Instructions - Rittal SK 3178800 Assembly And Operating Instructions Manual

1 Notes on documentation

1 Notes on documentation
EN
1.1

CE labelling

Rittal GmbH & Co. KG confirms the conformity of the
cooling unit with the European Union's Machinery Direc-
tive 2006/42/EC and EMC Directive 2014/30/EC. A cor-
responding declaration of conformity has been issued
and enclosed with the unit. These are the original oper-
ating instructions.
1.2

Storing the documents

The assembly and operating instructions as well as all
other applicable documents are an integral part of the
product. They must be issued to everyone who works
with the unit and must always be available and on hand
for operating and maintenance personnel.
1.3 Symbols used in these operating in-
structions
The following symbols are used in this documentation:
Warning!
A dangerous situation which may cause
death or serious injury if the instructions
are not followed.
Caution!
A dangerous situation which may lead to
(minor) injuries if the instructions are not
followed.
Note:
Important notices and indication of situations
which may result in material damage.

This symbol indicates an "action point" and shows that
you should perform an operation or procedure.
1.4

Other applicable documents

Paper copies of the assembly and operating instructions
are available for the unit types described here and are
enclosed with the equipment.
We cannot accept any liability for damage associated
with failure to observe these instructions.

Please also observe the instructions for any accesso-
ries used.
4 Rittal enclosure cooling unit