6. BATTERY REPLACEMENT
If battery is weak, LCD display will show "LO" indicator.
This reminds user to replace new battery.
1) Open "Battery Cover"(3-6, Fig. 1) located at the bottom
of the scale.
2) According to the device instruction, place batteries(1.5V AA
size battery x 6 PCs) into the battery compartment &
replace the battery cover.
7. DC 9V AC/DC ADAPTER OPERATION
(Adapter is optional accessory)
1) The scale will also be operated by the household ACV
power source (110/220/240 ACV) with a DC 9V AC/DC
Adapter(capacity 300 mA).
2) Plug the jack from the Adapter into the "DC 9V
receptacle"(3-7, Fig. 1).
3) Now the scale is ready for ACV operation.
8. RS232 PC SERIAL INTERFACE
The instrument features an RS232 output via 3.5 mm
Terminal ( 3-8, Fig. 1).
The connector output is a 16 digit data stream which
can be utilized to the user's specific application.
An RS232 lead with the following connection will be
required to link the instrument with the PC serial port.
5