Philips HTS3578/51 User Manual page 24

Map the audio inputs to the
connected devices
Note
•
Before you start, ensure that the audio output
of the HDMI TV and other HDMI devices have
been connected to the audio input jacks on
this Home Theater System.
General Setup
1
Press DISC .
2
Press SETUP .
» [General Setup] menu is displayed.
3
Press .
4
Select [EasyLink Setup] , then press .
• [One Touch Play] and [One Touch
Standby] functions are turned on by
default in the factory.
5
Select [System Audio Control] > [On] ,
then press OK to start scanning devices.
»
Once complete, audio input mapping
menu is displayed.
24 EN
Audio Input Mapping
For example, if the TV audio is
connected to the AUX1 jack on this
Home Theater System, select [Aux1]
and map with the TV (brand name) at
the right panel.
6
Select the audio input of this Home
Theater System that is used to connect to
other HDMI device (e.g. AUX1, AUX2),
then press .
7
Select the correct connected device, then
press OK .
»
Repeat steps 5~7 to map other
connected devices.
8
Press SETUP to exit the menu.