Play From A Usb Storage Device; More Play Features For Disc Or Usb; Play From Radio - Philips HTS3510/12 Manual

Philips immersive sound home theatre hts3510 hdmi 1080p
Hide thumbs Also See for HTS3510/12:
Table of Contents

Advertisement

Play from a USB storage device

The home theater is fitted with a USB connector
that allows you to view pictures, listen to music or
watch movies stored on a USB storage device.
1
Connect the USB storage device to the
home theater.
2
Press USB.
» A content browser appears.
3
Select a file, then press OK.
4
Press the playback buttons to control play
(see 'Play a disc' on page 11).
Note
If the USB storage device does not fit into the
connector, use a USB extension cable.
The home theater does not support digital
cameras that need a computer program to
display photos.
The USB storage device must be FAT or DOS-
formatted, and Mass Storage Class compliant.
More play features for disc or
USB
Several advanced features are available for video
or picture playback from a disc or USB storage
device.
Play a musical slideshow
Play music and pictures simultaneously to create
a musical slideshow. The files must be stored on
the same disc or USB storage device.
1
Select a music track, then press OK.
2
Press
BACK and go to the picture
folder.
3
Select a picture, then press OK to start
slideshow.
4
Press
to stop slideshow.
5
Press
again to stop music.
EN
12
Synchronize audio with video
If the audio and video are not synchronized, you
can delay the audio to match the video.
1
Press and hold AUDIO SYNC until the
audio sync message appears on the display
panel.
2
Press +/- within five seconds to sync the
audio with your video.
Quick skip play to a specific time
Quick skip to a specific part of a video by
entering the time of a scene.
1
During video play, press
2
Press the Navigation buttons and OK to
select:
[TT Time] : Title time.
[Ch Time] : Chapter time.
[Disc Time] : Disc time.
[Track Time] : Track time.
3
Enter the time of the scene, then press OK.

Play from radio

The home theater can store up to 40 radio
stations.
1
Check that the FM antenna is connected.
2
Press RADIO.
» "AUTO INSTALL...PRESS PLAY' appears
on the display panel if you have not
installed any radio stations. Press
3
Press the following buttons to control play:
Button
Action
/
Selects a preset radio station.
/
Searches for a radio station.
Fine tunes a radio frequency.
Press and hold to erase the
preset radio station.
Press to stop the installation of
radio stations.
PROGRAM Manual: Press once to access
program mode, and press again
to store the radio station.
Automatic: Press and hold for
five seconds to reinstall radio
stations.
INFO.
.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hts3510Hts3520

Table of Contents