Table of Contents
Advertisement
Diamond Custom Machines Corp.
moisture between the rolling stone hub and the metal shaft. You will need to remove the
rolling stones from the machine and completely clean the inside of the rolling stone and air
dry it well before reassembly.
Q:
My machine is making a strange scraping sound from time to time, is that normal?
A:
There is a possibility that in your nibs there was a small stone or hard impurity of some kind.
The scraping noise could also come from the wipers touching the drum. Make sure there is
clearance between the wall of the drum and the wiper. Also ensure that there is space between
the wiper and the bottom bed stone.
In general, if your refining mixture is not "flowing" smoothly in the drum, something is wrong and
needs to be addressed. If you have ANY concerns or questions about your Melanger, please feel
free to contact us immediately.
9. TECHNICAL SPECIFICATIONS
Generic Name:
Color:
Outer body:
Stones and Base:
Power Requirements:
Overall Dimensions:
Weight:
Motor:
Cable Length:
Maximum Capacity:
Version 1 : 16 April 2018
DCM Melanger – 20
Stainless Steel outer body
Stainless Steel
Granite
100-120 VAC or 208-230VAC,
1 phase 50/60 Hz, 5 amps
Approx 24"x 19"x 17"
Approx 120 lbs
1/4 HP, 3 phase motor
10 feet
10 kgs / 22 lbs
U ser Manual Model: DCM - 20
Page 2
4
of 2 8
Advertisement
Table of Contents
