Office Star Products SPX8992 Operating Instructions

7R
8
10
11
1
2
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérifier que les
quantités des pièces reçues sont correctes.
ÉTAPE 1 Insérer cinq roulettes (2) dans la base (1), les pousser très fort jusqu'à ce que vous entendiez ou sentiez la roulette (2) s'enclencher. Insérer le
cylindre pneumatique avec soufflet (3) dans la base (1).
ÉTAPE 2 Fixer la plaque du siège (4) au coussin du siège (5) avec la flèche vers l'avant du siège. Fixer la plaque du siège (4) au coussin du siège (5) avec
quatre rondelles plates (8) et quatre vis courtes (9). RESSERRER COMPLÈTEMENT TOUTES LES VIS AVEC LA CLÉ ALLEN (12).
ÉTAPE 3 Placer le siège assemblé sur le dessus du vérin pneumatique (3) et pousser vers le bas. Aligner les trous des accoudoirs (7L et 7R) sur les trous
du coussin du siège (5) et trous du coussin du dossier (6), fixer les accoudoirs (7L et 7R) au coussin du siège (5) et coussin du dossier (6) avec quatre
rondelle plate (8) et quatre vis longues (10). RESSERRER COMPLÈTEMENT TOUTES LES VIS AVEC LA CLÉ ALLEN (12). Couvrir les
trous dans les accoudoirs (7L et 7R) de l'aide des bouchons en plastique (11).
ATTENTION: AVANT D'UTILISER LE FAUTEUIL, S'ASSURER D'AVOIR SERRÉ COMPLÈTEMENT TOUTES LES VIS.
SPX8992
FAUTEUIL DE DIRECTION EN
ECO À DOSSIER HAUT
INSTRUCTIONS DE MONTAGE
6
7L
5
4
8
9
PIÈCE
3
1. Base . . . . . . . . . . . . . . . . . . . . . . . 1
2. Roulette . . . . . . . . . . . . . . . . . . . . . 5
3. Vérin Pneumatique avec soufflet . . 1
4. Plaque du Siège . . . . . . . . . . . . . . 1
5. Coussin du Siège . . . . . . . . . . . . . 1
6. Coussin du Dossier . . . . . . . . . . . . 1
7. Accoudoirs (7L et 7R) . . . . . . . . . . 2
8. Rondelles Plates . . . . . . . . . . . . . 12
9. Vis Courtes . . . . . . . . . . . . . . . . . . 4
10. Vis Longues . . . . . . . . . . . . . . . . . 8
11. Bouchons en Plastique . . . . . . . . 8
12. Clé Allen (non montrée) . . . . . . . . 1
1
QTÉ
GENERAL CHAIR WARRANTY
Office Star General chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 2 Years on all non-moving metal parts.
• 1 Year on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 1 Year on upholstery fabric and foam against wear and deterioration.
• We cannot warrant leather against routine scratching and scuffing, as all leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization.
At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component. The customer must prepay freight on any components returned to the factory. Return freight on components
still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal Residential usage by persons weighing 200 lbs. or less. This warranty will not cover labor,
freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star
Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The
user assumes all risk of injury resulting from use of this product. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
It is the customer's responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty
will be paid by Office Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free
parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
© Office Star Products avril 2015
SPX8992
EXECUTIVE HIGH BACK LEATHER CHAIR
OPERATING INSTRUCTIONS
FEATURE
• HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever
(1). To lower seat height sit on chair and lift lever(1).
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped
with an adjustment that will allow the user to change
the tension of the tilting feature. Turn knob (2)
clockwise to increase tension and counter-clockwise to
decrease or ease the tension. To lock return chair to
the upright position and push lever (1) in. To unlock pull
lever (1) out.
NOTE: Be careful not to loosen back tilt adjustment knob
completely.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs
are securely tightened.
2
3. Check that all bolts screws and knobs are tight every
three months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use
plastic cover as head covering. It may cause
suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.