Philips HTS9140/12 User Manual page 30

DivX subtitles do not display correctly.
•
Ensure that the subtitle file name is the
same as the movie file name.
•
Select the correct character set: 1) Press
OPTIONS /
[Character Set]. 3) Select the supported
character set. 4) Press OK.
The contents of a USB storage device cannot be
read.
•
Ensure that the format of the USB storage
device is compatible with the home theater
(see 'Product specifications' on page 25).
•
Ensure that the USB storage device
is formatted with a file system that is
supported by the home theater.
'No entry' or 'x' sign appears on the TV.
•
The operation is not possible.
EasyLink feature does not work.
•
Ensure that the home theater is connected
to a Philips brand EasyLink TV and that
EasyLink is on.
I do not want my home theater to be switched
on when I switch on my TV.
• This is the correct behavior for Philips
EasyLink (HDMI-CEC). To make the home
theater work independently, switch off
EasyLink.
I cannot access BD-Live features.
•
Check the network connection (see
'Connect to a computer network and
the Internet' on page 12) or ensure that
the network has been set up (see 'Set up
network' on page 12).
• Clear memory storage (see 'Change
advanced settings' on page 23).
•
Ensure that the Blu-ray disc supports
BD-Live feature.
The video (movies, photos, video clips, etc.)
contents of the iPod/iPhone do not display on TV.
•
Video and photo browsing is not supported,
you can only browse the video and photo
contents on the iPod/iPhone itself.
Cannot see pictures from my iPod/iPhone on the
TV.
• Connect a yellow composite cable from the
dock to the TV.
• Switch the TV to the AV/VIDEO source
(corresponding to the yellow composite
cable).
• Press PLAY on the iPod or iPhone to start
the slideshow.
EN
28
(Options). 2) Select
The audio is interrupted when I play music from
my iPod or iPhone in the docking station.
•
Ensure that you have installed the latest
firmware on your iPod or iPhone. For more
information, refer to the support website of
your iPod or iPhone.
My 3D video plays in 2D mode.
• Ensure that your home theater is connected
to your 3D TV through HDMI.
•
Ensure that your disc is a Blu-ray 3D disc.
• Ensure that the [Blu-ray 3D video] setting
is turned on (see 'Change video settings' on
page 21).
I see black video on my TV screen.
•
Ensure that your home theater is connected
to the TV through HDMI.
• Switch to the correct HDMI source on your
TV.
Network
Wireless network not found or distorted.
•
Ensure that the wireless network is not
disturbed by the microwave ovens, dect
phones or other Wi-Fi devices in your
neighbourhood.
•
Try the wired network installation if the
wireless network does not work properly
(see 'Set up network' on page 22).