Table of Contents
Advertisement
Note:
R If the batteries are fully charged, but the operating time seems to be shorter,
clean the battery ends (
charge again.
Removing the battery
Registering a handset to a base unit
1
Base unit:
Press and hold MLOCATORN for about 5 seconds.
R If all registered handsets start ringing, press MLOCATORN again to stop,
2
Handset:
Place the handset on the base unit or charger, then wait until a long beep
sounds and
Note:
R If an error tone sounds, or if
the base unit's operating instructions.
Display language
1
MMENUN#110
2
MbN: Select the desired setting. a MSAVEN a MOFFN
Using a Bluetooth headset
By pairing a Bluetooth headset to the handset, you can enjoy hands-free
conversations when talking over a phone calls. For details about the operations,
refer to the base unit's operating instructions.
Important:
R Your Bluetooth headset must support the Hands Free Profile (HFP) specification.
R Up to 4 Bluetooth headsets can be paired to the handset.
R Only 1 Bluetooth headset can be used with the unit at a time.
For assistance, please visit http://shop.panasonic.com/support
KX-TGDA99_0110_ver001.pdf 7
,
then repeat this step.
is displayed.
) and the charge contacts with a dry cloth and
1
is displayed, register the handset according to
Installation
2
7
10/1/2021 7:56:45 AM
Advertisement
Table of Contents
