Advertisement
WAVECREST Corporation
9.0
Shut Down the DTS System
(9-1) Go to Menu #11 and select CLEAR. Then press FUNC to return the system to the default
state.
(9-2) Power off the standby switch on the front panel and the main power switch on the rear of
the instrument. Remove all cables and unplug the AC power cord from the power source
and package the accessories that accompanied the system for return to the customer.
9.1
End of Calibration Procedure
If any display function does not appear to provide reasonable results, notify the
WAVECREST Corporation factory for support at 1-800-733-7128.
DTS-2077 Calibration Procedure
8
(17 April, 1998)
Advertisement
