Advertisement
Cautions using your Tank
•
The Tank walls can get very hot, Be Careful.
•
Keep the cord out of the way of traffic and not where someone might trip over it.
•
Keep children away from the tank and electrical components.
•
Do not drop water on the control box.
•
When moving the tank, let it cool and drain it completely.
•
Do not use an extension cord or power strip.
•
Safety first!
Troubleshooting your Tank, if it is not heating:
First, check the following.
•
Is the unit plugged in?
•
Check the cord and plug. Are they in good shape, not cut or damaged?
•
Has the Breaker been tripped or a fuse blown?
•
Try a lamp or something else that you know works, will work in the outlet?
Call an Electrician or Plumber, if you do not know what you are doing. All tanks are tested prior to shipment.
If it is not heating, then it might not be installed correctly or something in the circuit providing the power is not
correct.
Check the Heater/Thermostat box.
BEFORE TESTING YOUR ELEMENT, UNPLUG YOUR HEATER/THERMOSTAT!
You can download instructions for checking and replacing your element at...
https://discountsoapequipment.com/Parts_c_22.html
If you experience any difficulties with your equipment, have questions or suggestions, please contact
Technical Support at... customercare@discountsoapequipment.com
765-754-3613 - discountsoapequipment.com - emmachining.com
goes in this tube next
Perforated, stainless
steel plate
© 1995-2019 E&M Machining, Inc
Frankton, Indiana
Page 3 of 3
Capillary Bulb
to heating element.
Made in the USA
Advertisement
