Advertisement
Quick Links
All Purpose Melter
Instruction Manual
To reduce the risk of personal injury or property damage, when using electrical appliances basic
safety precautions should always be followed, including the following:
•
Read all instructions.
•
Make sure nothing is plugged in until water is completely covering the element
•
The outside of the melter will get HOT, use caution and keep children and pets away.
•
Unplug from outlet when not in use and before cleaning. Allow cooling before putting on
or taking off parts, and before cleaning.
•
SAVE THESE INSTRUCTIONS
If you experience any difficulties with your equipment, have questions or suggestions, please contact
Technical Support at... customercare@discountsoapequipment.com
765-754-3613 - discountsoapequipment.com - emmachining.com
Professional
Model: PM-01
Important Safeguards
© 1995-2019 E&M Machining, Inc
Frankton, Indiana
Page 1 of 3
Made in the USA
Advertisement
Summary of Contents for E&M PM-01
- Page 1 Professional All Purpose Melter Instruction Manual Model: PM-01 Important Safeguards To reduce the risk of personal injury or property damage, when using electrical appliances basic safety precautions should always be followed, including the following: • Read all instructions. • Make sure nothing is plugged in until water is completely covering the element •...
- Page 2 Important notes for the All Purpose Melter: • Please read all instructions before attempting to set-up your Melter. • Put enough water in it to check for leaks. • Keep about 2” of water above the perforated, stainless steel plate. •...
- Page 3 Capillary Bulb goes in this tube next to heating element. Perforated, stainless steel plate Cautions using your Tank • The Tank walls can get very hot, Be Careful. • Keep the cord out of the way of traffic and not where someone might trip over it. •...