Waterworks HNWS02 Installation Manuallines

INSTALLATION GUIDELINES
IMPORTANT:
To ensure this product is installed properly, you must read and follow these guidelines.

The owner/user of this product must keep this information for future reference.

 Install adequate blocking or position over a stud to properly secure the fixture.
Inspect this product, upon receiving, to ensure it is the correct model and you have all parts

required for proper installation.
Slab top, fittings and Lavatory sold separately.

 This product must be installed by a professional licensed contractor. Be sure your installation
conforms to all federal, state, and local codes.
 Take all necessary precautions to ensure that this product is protected during installation.
Ensure the floor is level and the weight of this product will be adequately supported.

 The use of certain plumber's putty may stain stone or tile surfaces.
PRODUCT SUPPORT | 800.927.2120 | WATERWORKS.COM
TECHNICAL DETAILS:
DETAIL
ADJUSTABLE LEVELERS/FEET
DIAMETER OF LEGS/TUBES
PRIMARY MATERIAL
RECOMMENDED ROUGH-IN SUPPLY HEIGHT
RECOMMENDED ROUGH-IN SUPPLY SPREAD
RECOMMENDED ROUGH-IN WASTE HEIGHT
STORAGE CAPACITY
TOP ATTACHMENT METHOD
WEIGHT
25 " [659mm]
15/16
29" [737mm]
Ø 3 " [78mm]
1/16
Ø 1 " [38mm] 27 " [469mm]
1/2 7/8
STYLE No. HNWS02
Henry Metal Round 2 Leg Washstand
29" x 20" x 31¾ "
SPECIFICATION
YES
1 ½ " [38mm]
Brass
21"
9"
19"
28½" x 17⅝"
Silicone
#LBS
20" [508mm]
18 " [469mm]
7/8
PAGE 1 OF 2 | UPDATED ON 8.17.2018