Advertisement
Quick Links
Advertisement
Related Manuals for Hyco W28LD Series
Summary of Contents for Hyco W28LD Series
- Page 1 W28LD Series Product 2D Ring Scanner User Manual www.hycoiot.com...
- Page 2 The products depicted in this manual may include software copyrighted by Shanghai Hyco Genyong Technology Co., Ltd. or a third party. The user, corporation or individual, shall not duplicate, in whole or in part, distribute, modify, decompile, disassemble, decode, reverse engineer, rent, transfer or sublicense such software without prior written consent from the copyright holders.
- Page 3 W28 Series Product 2D Ring Scanner User Manual Design Ring Scanner * Wearing: wear on index finger on left or right hand * Scanning: touch either side of ring body with thumb finger to trigger the scanning Ring scanner charging cradle（Bluetooth Receiver）...
- Page 4 W28 Series Product 2D Ring Scanner User Manual Charging 1. Charging Ring Scanner Charging Illustration 1 Charging Illustration 2 * Connect the Ring scanner charging cradle to power, click the ring scanner into the bottom of cradle with the scan window upward. Please note the power contacts of the ring and cradle must be touched.
- Page 5 W28 Series Product 2D Ring Scanner User Manual Ring Scanner Modes 1.SPP Mode (default factory settings) Charging cradle connection and program docking mode To connection with PC via USB cradle, scan COMMON code, and scanning barcode is available. (Random terminal system is acceptable with the cradle) In this protocol transmission mode, if you need different system programs docking, please get the relevant development SDK at the official website or contact the relevant agent technical support.
-
Page 6: Bluetooth Connection
W28 Series Product 2D Ring Scanner User Manual Bluetooth connection Connect with PC: Connect the cradle with the PC with USB, and the green light means normal connection. After 15 seconds, scan the Bluetooth connection barcode with the ring scanner, and a blue light indicates successful connection. Connect with Android smart phone/tablet: First, find the Bluetooth connection barcode on the side of the cradle, scan it with the ring scanner, and change the Bluetooth name to the serial number so that the... - Page 7 W28 Series Product 2D Ring Scanner User Manual Components Components Quantity Usage 1.Reading Barcodes/2D codes Ring Scanner 2.Bluetooth slave 1.Charging cradle Ring Cradle 2.Bluetooth receiver Charging Connect adapter to power with USB cable Adapter 1.Connect charger to USB port USB cable 2.Connect charger to charging adapter Ring Strap 10 pcs in different sizes...
-
Page 8: Specifications
W28 Series Product 2D Ring Scanner User Manual Specifications Model W28LD Scanner HYCO CMOS-Sensor Scanner Resolution 1280x800 pixcels Code Reading 5 meters barcodes/2D codes reading Scanning Distance 5 meters long-distance scanning Weight 20g (without strap) Dimensions (W*D*H) 38.6mm*29.0mm*22.1mm Ring Straps... -
Page 9: Ring Indicator
W28 Series Product 2D Ring Scanner User Manual Functions 1.Scanning Wear on left or right index finger, touch left or right side of ring and aim at the barcode, the ring light turns green, it starts to scan. 2.Ring Straps Firstly, straightly pull out ring strap from the slot, then choose another ring strap and push it to the top of slot. - Page 10 W28 Series Product 2D Ring Scanner User Manual Scan the barcode “Restore factory settings”, the ring will disconnect Bluetooth connection with terminal devices, and all the settings will change to factory default. 5.Charging cradle light indicator The blue light indicates successful Bluetooth connection between ring scanner and cradle.
- Page 11 W28 Series Product 2D Ring Scanner User Manual After scan the barcode “Automatic laser calibration”, the ring turns on purple, put it on the table, wait for 15 seconds until the purple light turns off. The ring laser is calibrated right and functions normally. 8.Code system on/off 1.
- Page 12 W28 Series Product 2D Ring Scanner User Manual Notice » The ring window must be kept clean. Improper usage will breach the limited warranty clause. » Avoid rough objects scratching the window. » Remove stains from window by soft cloth. »...
- Page 13 W28 Series Product 2D Ring Scanner User Manual Slow down data transmission through ring cradle Speed up data transmission through ring cradle In HID mode, scan the barcode "Speed up data transmission through ring cradle", it can accelerate the data transmission speed between the cradle and computer; scan the barcode "Slow down data transmission through ring cradle", it can slow down the data transmission between the cradle and computer.
- Page 14 W28 Series Product 2D Ring Scanner User Manual After scan "Automatic interval scanning" bar code, ring could automatically scan every 0.5 ~ 3 seconds without touching (2 seconds by default) Automatic interval scanning-reduce After scan "Automatic interval scanning-reduce" barcode, it can expedite the scanning speed once by 0.5 second, the fastest scanning speed is scanning once every 0.5 second.
- Page 15 W28 Series Product 2D Ring Scanner User Manual Laser calibration 2. After scan “Widen” barcode, the laser length becomes long; after scan “short ” barcode, the scan angle becomes short. Extend laser Shorten laser Note: do not extend or shorten more than 10 times one time. 3.
- Page 16 W28 Series Product 2D Ring Scanner User Manual Common functional barcodes To meet different needs for customers, there are some functional barcodes used to meet the requirements for different customers. Add Enter Delete Enter After scan “Add Enter” barcode, it can automatically move to next line in the text field after each scanning.
- Page 17 W28 Series Product 2D Ring Scanner User Manual HYCO Technology Website: www.hycoiot.com Email: global_sales@hycoiot.com Phone Number: +86 15201965826...
Need help?
Do you have a question about the W28LD Series and is the answer not in the manual?
Questions and answers