Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Hyco W26
Summary of Contents for Hyco W26
- Page 1 User Manual Cradle: FCC ID:2ARHS-W2X Ring: FCC ID:2ARHS-W26...
- Page 2 This manual is copyrighted. No part of this publication may be reproduced or used in any form without written permission from Hyco. Hyco Genyong Technology Co., Ltd. reserves the right to make final interpretation of the statement above. Hyco Genyong Technology Co., Ltd.
- Page 3 User Manual Design Ring Scanner Wearing: wear on index finger on left or right hand Scanning: touch either side of ring body with thumb finger to trigger the scanning Ring scanner charging cradle（Bluetooth Receiver）...
- Page 4 User Manual Charging 1. Charging Ring Scanner Charging Illustration 1 Charging Illustration 2...
- Page 5 User Manual Connect the Ring scanner charging cradle to power, click the ring scanner into the bottom of cradle with the scan window upward. Please note the power contacts of the ring and cradle must be touched. The red light indicates it is in charging, when the green light turns on, it’s finished charging.
- Page 6 User Manual communication between ring scanner and cradle is successfully set up. Connect with Tablet PC or phone: Enter the “ Setting ” in the Tablet PC or phone, click "Bluetooth search", find the Bluetooth serial number of the ring scanner, choose the corresponding Bluetooth serial number in the searching list.
- Page 7 User Manual Change connection with different masters among computer, Tablet PC and phone. When ring pairs with different terminal devices, user needs to scan different barcode before Bluetooth connection. To connect ring scanner with computer, please scan the barcode “COMMON”, but it is set by default. To connect ring scanner with Smart Phone or Tablet PC based on IOS system, please scan the barcode "IOS".
- Page 8 User Manual To connect ring scanner with Smart Phone or Tablet PC based on Windows system, please scan the barcode "WINDOWS". Components...
-
Page 9: Specifications
User Manual Specifications... - Page 10 User Manual Functions 1. Scanning Wear on left or right index finger, touch left or right side of ring and aim at the barcode, the ring light turns green, it starts to scan. 2. Ring Straps Firstly, straightly pull out ring strap from the slot, then choose another ring strap and push it to the top of slot.
- Page 11 User Manual The green light indicates successful scanning. The red light flashing indicates low battery. The green light keeping on for 1 second indicates successful Bluetooth connection. The blue light keeping on for 1 second indicates Bluetooth disconnection.
- Page 12 User Manual disconnect Bluetooth connection with terminal devices, and all the settings will change to factory default. 5. Charging cradle light indicator 6.Wake up ring in charging The ring doesn ’ t work when in charging, while it could be waked up by touching either side of ring three times.
- Page 13 SERVICE 1.Warranty: one year for ring scanner, half year for battery and accessories. 2.Contact: junqi.zheng@hyco.cc Notice » The ring window must be kept clean. Improper usage will breach the limited warranty clause. » Avoid rough objects scratching the window.
- Page 14 User Manual Function barcodes setup Change function of scanning after scanning the following barcodes: "Device information" barcode includes device information (e.g. serial number, version number, Bluetooth version information). Scan function code “ Vibration Open ” to activate vibration function, Scan function code “ Vibration close ” to close...
- Page 15 User Manual vibration function. In HID mode, scan the barcode "Speed up data transmission through ring cradle", it can accelerate the data transmission speed between the cradle and computer; scan the barcode "Slow down data transmission through ring cradle", it can slow down the data transmission between the cradle and computer.
- Page 16 User Manual If user wants to change to common scanning, scan the “Manual Trigger Mode” bar code. "Manual Trigger Mode" is set by default, user needs to touch ring once to scan once. After scan "Automatic interval scanning" bar code, ring could automatically scan every 0.5 ~ 3 seconds without touching seconds by default) After scan "Automatic interval scanning‐reduce"...
- Page 17 User Manual scanning speed is scanning once every 0.5 second. After scan "Automatic interval scanning‐increase" barcode, it can slow down the scanning speed once by 0.5 second, the slowest scanning speed is scanning once every 3 seconds. Scan angle adjustment According to different barcode length, user needs to change laser length to achieve better scanning effect.
- Page 18 User Manual 2、After scan “Widen” barcode, the laser length becomes long; after scan “short ” barcode, the scan angle becomes short . Note: do not extend or shorten more than 10 times one time. 3、Scan “Confirm” barcode, the ring light turns yellow and white, the laser length is confirmed.
- Page 19 User Manual Common functional barcodes To meet different needs for customers, there are some functional barcodes used to meet the requirements for different customers. After scan “Add Enter” barcode, it can automatically move to next line in the text field after each scanning. If user wants to close the function, scan “Delete Enter”...
- Page 20 User Manual After scan "Add the tab" barcode, it can automatically move to next line in excel after each scanning. If user wants to close the function, scan "Delete the tab" barcode.
- Page 21 User Manual Note: USB connection port information: Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The connection to so called power USB is prohibited. Temperature information: When charging, please place the device in an environment that has a good ventilation.
- Page 22 User Manual EU Regulatory Conformance Hereby, Hyco Genyong Technology Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site: www.hyco.cc/certification. Scope of application...
Need help?
Do you have a question about the W26 and is the answer not in the manual?
Questions and answers