Candela New GentleYAG Installation Procedure
Hide thumbs
Also See for New GentleYAG:
- Alignment procedure (10 pages) ,
- Replacement procedure (5 pages) ,
- Calibration procedure (4 pages)
Related Manuals for Candela New GentleYAG
Summary of Contents for Candela New GentleYAG
- Page 1 New GentleYAG Installation Procedure Candela Corporation New GentleYAG Installation Procedure 8503-01-0831,Revision B Candela Corporation Proprietary Page1 of 6...
- Page 2 New GentleYAG Installation Procedure Candela Corporation WARNING FOLLOW THE INSTALLATION STEPS IN SEQUENCE TO ELIMINATE ANY POSSIBLE DAMAGE TO THE SYSTEM. Equipment Needed: • Adjustable Wrench or 9/16 Socket Wrench • 2.5 Liters of Distilled Water 1. Laser System Unpacking: 1.1.
- Page 3 New GentleYAG Installation Procedure Candela Corporation 2. Coolant system filling: 2.1. Remove the black cap on the reservoir, located on the rear of the laser. 2.2. Add distilled water up to within ½ to 1 inch of top of reservoir.
- Page 4 New GentleYAG Installation Procedure Candela Corporation 4. Delivery System Installation: 4.1. Remove the Delivery System from its box. 4.2. With the system turned off, place the distal end of the handpiece assembly into the calport. 4.3. Connect the handpiece control (round, electrical plug) connector to the handpiece valve control receptacle on the front of the laser system .
- Page 5 8.2. If it becomes necessary to relocate the GentleYAG, call Candela or the distributor for details. Failure to do so may result in damage to the system, and may void any warranty.
- Page 6 New GentleYAG Installation Procedure Candela Corporation 8503-01-0831,Revision B Candela Corporation Proprietary Page6 of 6...
Need help?
Do you have a question about the New GentleYAG and is the answer not in the manual?
Questions and answers