Philips FWD185/98 Quick Use Manual page 2

You should find the below accessories in the packaging box.
Detailed playback features and additional functions are described in the
FWD185 QSG_Eng without DEMO
Make sure your DVD system and TV are connected and turned on!
Plug & Play
1
Turn on the system.
"AUTO INSTALL PRESS PLAY" will be displayed.
2
Press PLAY 2; on the system to start installation.
Playing a disc
3
Press DISC on the remote control to select disc mode.
4
Turn on the TV and select the correct Video In mode.
You should see the blue Philips DVD background screen on the TV (If no disc in the DVD
system).
5
Press OPEN
press the corresponding OPEN
Make sure the disc label is facing up. For double-sided discs, load the side you want to play
face up.
6
Playback will start automatically.
If a disc menu appears, use
selection, then press OK to confirm. Or, use the
features. Follow the instructions given in the disc menu.
7
To stop playback, press STOP 9.
Region Codes
DVDs must be labeled for ALL regions or Region 3,
in order to play on this DVD system.
Audio cable
( white , red )
AC power cable
Remote control and
AAA sise batteries
accompanying owner's manual
2
CLOSE on the front of the DVD system and load a disc, then
0
CLOSE again to close the disc tray.
0
1 / 2 / 5 / 4
buttons on the remote to make the necessary
MW loop
( T type)
antenna
Composite vide
cable ( yellow )
1/1/32, 3:55 AM
on the remote to select
Numeric Keypad
FM antenna
( pig tail )
Component vide cable
( red , blue , green )