Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for REA TD-GPT-U
- Page 1 Rationalisierung • Entwicklung • Automation Elektronik Elektronische Geräte und Systeme GmbH REA TD-GPT-U A portable report printer for REA Bar Code Verifiers © REA Elektronik GmbH, D-64367 Mühltal / Germany +49 (0) 6154 638-0 • Fax - 195 Thermal printer TD-GPT-U February 2012-...
-
Page 2: Table Of Contents
Error Detection and Recovery ....................13 CE Certification ........................15 Technical data........................16 Sizes ............................. 17 Warranty conditions....................... 18 © REA Elektronik GmbH, D-64367 Mühltal / Germany +49 (0) 6154 638-0 • Fax - 195 Thermal printer TD-GPT-U February 2012- Page 2 of 18... -
Page 3: Symbols And Their Meaning
Safe operation of the printer is only granted, if the instructions in this operating manual are recognised. For installation: Always disconnect power supply. In case of any technical question please contact REA Elektronik GmbH. © REA Elektronik GmbH, D-64367 Mühltal / Germany +49 (0) 6154 638-0 •... -
Page 4: Security Hints
(except lean the print head). Use spare parts and accessories supplied or authorized by REA Elektronik GmbH. The use of unauthorized parts or accessories may affect the function and safety of the device. All parts included are listed in the chapter "Packing List", while the original accessories are listed in the chapter "Parts and Accessories". -
Page 5: Description Of Operation
GmbH Description of operation The REA TD-GPT-U is a portable, battery operated industrial printer in a rugged glass-fibre plastic housing. Due to the wide range of operating temperature (-10 - +60° C with specified paper), the printer can be used outdoors. -
Page 6: Power Supply
The printer incorporates an intelligent battery charging circuit. This circuit does not have a current limiter. The current limitation is ensured by the supplied power supply. Another power supply with more power may therefore destroy the printer. © REA Elektronik GmbH, D-64367 Mühltal / Germany +49 (0) 6154 638-0 • Fax - 195 Thermal printer TD-GPT-U... - Page 7 8 minutes for 20 seconds. This is shown to the operator by switching the STATUS LED for this time permanent on. The REA TD-GPT-U printer meets the USB specification V1.1 for full-speed devices. The printer is compatible to USB V2.0 bus systems.
-
Page 8: Paper Change
In principle the printer can also print on self adhesive labels. For correct label positioning a mark between the labels is required. © REA Elektronik GmbH, D-64367 Mühltal / Germany +49 (0) 6154 638-0 • Fax - 195 Thermal printer TD-GPT-U February 2012-... -
Page 9: Exchange Of Batteries
Battery plug connection, 6pin The REA TD-GPT-U is secured against usual operating errors. A risk for mayor damages and battery explosion is there if using incorrect battery types, a short circuit, manipulations at the battery, or temperatures above 80 ° C. -
Page 10: Maintenance And Cleaning
The software version and the character set are printed. The USB interface cannot be checked by the self test. © REA Elektronik GmbH, D-64367 Mühltal / Germany +49 (0) 6154 638-0 • Fax - 195... -
Page 11: Off / Next Key
Select next menu point pressed pressed Leave menu and save new settings © REA Elektronik GmbH, D-64367 Mühltal / Germany +49 (0) 6154 638-0 • Fax - 195 Thermal printer TD-GPT-U February 2012- Page 11 of 18... -
Page 12: Printer Setup Example
1 min Available settings: OFF, 5 sec, 30 sec, 1 min, 10 min, 1 h, 12 h, 32 h © REA Elektronik GmbH, D-64367 Mühltal / Germany +49 (0) 6154 638-0 • Fax - 195 Thermal printer TD-GPT-U February 2012-... -
Page 13: Led Status
Print width: 48 mm Available settings: 48 mm ..32 mm For the REA TD-GPT-U the settings shown here must be used. If settings are changed the report print may be incorrect or is not possible. LED Status LED "STATUS" (green) The STATUS LED flashes slowly green if printer is ready and no fault is detected. - Page 14 Interface trouble. Data transfer is Check cable and replace it characters jammed. Incorrect printer setup Correct printer setup © REA Elektronik GmbH, D-64367 Mühltal / Germany +49 (0) 6154 638-0 • Fax - 195 Thermal printer TD-GPT-U February 2012- Page 14 of 18...
-
Page 15: Ce Certification
Component see declaration of conformity Power supply GNG-6V-0,5A-U 55024; 50082-1; 60335-1; 60742; 60950/A1 u. A2 © REA Elektronik GmbH, D-64367 Mühltal / Germany +49 (0) 6154 638-0 • Fax - 195 Thermal printer TD-GPT-U February 2012- Page 15 of 18... -
Page 16: Technical Data
Weight approx. 350 g paper roll incl. Housing PC-ABS with 15 % glass fibre, black © REA Elektronik GmbH, D-64367 Mühltal / Germany +49 (0) 6154 638-0 • Fax - 195 Thermal printer TD-GPT-U February 2012- Page 16 of 18... -
Page 17: Sizes
Rationalisierung • Entwicklung • Automation Elektronik Elektronische Geräte und Systeme GmbH Sizes © REA Elektronik GmbH, D-64367 Mühltal / Germany +49 (0) 6154 638-0 • Fax - 195 Thermal printer TD-GPT-U February 2012- Page 17 of 18... -
Page 18: Warranty Conditions
Warranty repair If the unit has a malfunction during the warranty period REA Elektronik will provide a free repair. Before sending a unit for repair the user's manual should be checked to ensure the unit has been used correctly.