Summary of Contents for NIPPON VALVE CONTROLS Vpro BR
Page 1
OSCBR225-EN Instruction manual Electric Actuated Ball Valve BR BS GS VR SP-1474 Please read this manual before installation and use. GENERAL Flange-end ball valve and compact electric actuator. Actuator AM : For AC power. AH1 : For AC power. (High speed) DM : For DC power.
Page 2
OSCBR225-EN VALVES SPECIFICATIONS Water Air, Gas Steam Chemicals Sea water Slurry Negative pressure type Valve type Design 2-way, Full port 2-way, Wafer 2-way, V-port Connection JIS10K Flanged-end JIS20K Flanged-end JIS Flanges 10K JIS10K Flanged-end Fluid Max pressure 1 MPa 2 MPa 1 MPa 1 MPa Size [mm]...
OSCBR225-EN VALVES SPECIFICATIONS Water Air, Gas Steam Chemicals Sea water Slurry Negative pressure type Valve type Design 2-way, Wafer Connection JIS Flanges 10K / 20K Fluid Max pressure 2 MPa Size [mm] 015 to 040 Material Body SCS14A Ball SCS14A (HCr PLTD) Seat R-PTFE PEEK...
Page 4
OSCBR225-EN ELECTRIC ACTUATOR SPECIFICATIONS type Actuator type AM1-030- AM1-070- AM1-180- AM2-030- AM2-070- AM2-180- ( :Voltage code) Voltage 100 / 110 V AC ±10 % 50/60 Hz (Voltage code: 1) 200 / 220 V AC ±10 % 50/60 Hz (Voltage code: 2) Rated torque [N m] 3 Operation time...
Page 5
OSCBR225-EN ELECTRIC ACTUATOR SPECIFICATIONS type Actuator type ( :Voltage code) AH1-030- AH1-070- AH1-180- Voltage 100 / 110 V AC ±10 % 50/60 Hz (Code: 1) 200 / 220 V AC ±10 % 50/60 Hz (Code: 2) Rated torque [N m] 3 Operation time [s] 3 / 2.5 (50/60 Hz) 6 / 5 (50/60 Hz)
Page 6
OSCBR225-EN ELECTRIC ACTUATOR SPECIFICATIONS type Actuator type DM0-030-0 DM0-070-0 DM0-180-0 DM2-030-0 DM2-070-0 DM2-180-0 Voltage 24 V DC Rated torque [N m] 3 Operation time [s] 0.8 to 1.5 2 to 3 4 to 6 2 to 3.5 2 to 3 4 to 6 Power consumption (Max) [VA]...
OSCBR225-EN ELECTRIC ACTUATOR SPECIFICATIONS OPTIONAL PARTS Specifications Code No. DM Remarks Aluminum alloy motor cover Manual lever Detachable lever Flexible cable (Approx. 300 mm long) DIMENSIONS AH1 (030 / AM (030 / 070) DM2 (030) AM (180) DM (180) AH1 (180) (030) (070) 070)
Page 8
OSCBR225-EN ELECTRIC ACTUATOR SPECIFICATIONS type Actuator type ( :Voltage code) PAX-050- PAX-120- Voltage 100 / 110 V AC ±10 % 50/60 Hz (Code: 1) 200 / 220 V AC ±10 % 50/60 Hz (Code: 2) Rated torque [N m] 5 Operation time [s] 14 / 12 (50/60 Hz) 30 / 25 (50/60 Hz)
Page 9
OSCBR225-EN ELECTRIC ACTUATOR SPECIFICATIONS OPTIONAL PARTS Specifications Code No. PAX Remarks Aluminum alloy motor cover Flexible cable (Approx. 300 mm long) Operation SHUT by decreased signal « OPEN by Increased signal Mode A SHUT by increased signal « OPEN by decreased signal Mode B DIMENSION PAX (050)
OSCBR225-EN INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS HANDLING & STORAGE CAUTIONS FOR MAINTENANCE (GS) HANDLING Do not keep warm for maintenance of the valve Do not drop or throw the product as it may break. gland. STORAGE Store away from dust, moisture and direct sunlight. If possible, store in the original package.
OSCBR225-EN INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS CONTROL OPERATION AM1 / AH1 TESTING Control switch should be prepared one by one for • Make sure that power supply voltage is correct. Also actuator. Do not operate two or more actuator from check operating position, wiring, speed and signals.
OSCBR225-EN INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS MANUAL OPERATION MAINTENANCE PRECAUTIONS • To prevent electric shock, be sure to turn off the • Manual operation should be a temporary operation. power when removing the actuator cover. • Be sure to turn off the power before manual •...
Stop in the Signal voltage Use a voltage source For more information contact mid position. source that can be made to NIPPON VALVE CONTROLS, INC. for consultation. (Input capacity flow more than 20 mA. signal’s shortage. Please contact us. 1 to 5 V.)