Software Upgrading, Error Code And Panel Code - Philips 22PFS5303/12 Service Manual

5. Software Upgrading, Error code and Panel Code

5.1 Software Upgrading
5.1.1. The following update is for .pkg file.
1. Rename the file to "upgrade_loader.pkg".
2. Prepare a USB memory (File format: FLAT, Size: 1G~8G).
3. Copy the software to USB flash disk (root directory).
4. Switch off the TV and Insert the USB memory stick that contains the software update files in one of the TV's USB 2.0 port.
5. Switch on the TV. The TV will detect the USB memory stick automatically. Then a window jumps out as below:
6. When the TV software is updated, the TV will turn on again automatically. Remove your USB flash drive.
7. We can enter in CSM to check the current software version.
5.1.2. The following update is for .upg file.
Step 1: Ready for F/W Upgrade
1. Rename the file to "Autorun.upg".
2. Prepare a USB memory (File format: FLAT, Size: 1G~8G).
3. Copy the software to USB flash disk (root directory).
Note the version of this F/W before you change the software file name.
Step 2: F/W Upgrade
1. Plug the USB memory on the TV's USB 2.0 port.
2. AC on (Power plug).
3. TV will show message as below image, Press [Start] to detect the software automatically