Unex DNMA-H5 Manual

Industrial-grade, high-power 802.11n a/b/g wifi 3x3 mini-PCI module w/ESD and Surge Protection,

Key Features:

▪ Rx fi lter design and accurate power controls in –40°C ~ +75°C temperature range can dramatically reduce wifi
interference to improve the data throughput and range performance in con-current 2.4 & 5GHz applications and
high-density outdoor hot-spot deployments.
▪ RF ESD and Surge protection up to 10KV ensure highest levels of performance and reliability in the harshest
outdoor mesh or military deployments.
▪ Industrial grade AR9160-BC1B chipset ensures reliability and durability in –40°C ~ +75°C range for rugged
devices.
▪ High RF power up to 400mW (26dBm) @ 5GHz and 600mW (28dBm) @ 2.4GHz provides superior wifi coverage.
▪ PA fi ne-tuning gains balance of linearity and power consumption with enough margin while maintaining adequate
Tx power to ensure no major performance degradation over time.
▪ 3~5dBi Tx linearity improvement than standard MB82 reference design.
▪ Same EVM on both light and heavy loading maintain lower packet error to increase channel effi ciency.
▪ 3.3Vdc+5.0Vdc dual power supply design (5Vdc from mini-PCI interface pin18 & pin 97 per mini-PCI standard)
enables high power application in limited PCB size.
▪ Mini-PCI Type IIIA form factor (length is 15mm longer than IIIA type) with screw hole is ideal for solid mounting
onto motherboard.
▪ Dual band 802.11 a/b/g/n support 3Tx/3Rx to enable data rate up to 300Mbps link rate for 40MHz channel, six
times the throughput of 802.11a and 802.11g.
▪ Supported by ath9k and FreeBSD providing Linux kernel driver for industrial, academic, or personal projects at
highest fl exibility and lowest cost.
▪ Atheros Linux SDK for AP and client-mode sub-license available by project.
▪ Supports 64/128/152-bit WEP encryption, IEEE 802.1x authentication, and AES & TKIP encryption.
▪ Heat sink design provides reliable high power RF performance.
▪ Three DIP type MMCX RF connector enables robust assembly and lower loss for external antenna.
▪ REACH and RoHS compliance meets environment-friendly requirement.
Why AR9160-BC1B industrial grade chipset required?
AR9160-BC1B
AR9160-BC1B+AR9106
Model: DNMA-H5
DNMA-H5 is an industrial-grade, high-power 802.11n a/b/g wifi 3x3 mini-PCI module
designed specifi cally to enable highest -performance, reliability, and durability in the
harshest temperature range of –40°C ~ +75°C.
Unique Rx fi lter design and power control accuracy in –40°C ~ +75°C temperature range
can dramatically reduce wifi interference to improve the data throughput and range
performance in con-current 2.4 & 5GHz applications and high-density outdoor hot-spot
deployments.
RF ESD/Surge protection up to 10KV ensures highest levels of performance and reliability
in the harshest outdoor environment such as mesh networking, military, bridging, and
infrastructure applications.
Atheros AR9160-BC1B industrial grade chipset supports 2 simultaneous traffi c
MIMO streams using up to 3 integrated Tx and Rx for high throughput and range
performance.
industrial grade
[Unex] - Ver. 2.7 20130401
AR9160-BC1A
commercial grade
P. 1