Panasonic KX-TG8231B Service Manual page 44

KX-TG8231B/KX-TG8232B/KX-TGA820B
9.1.4.3. Check Table for RF part
No. Item
1 Link Confirmation Normal
HS, BU Mode: [Normal mode]
2 Control signal confirmation
HS, BU Mode: [Burst TX mode]
3 X'tal Frequency confirmation
4 Range Confirmation Normal
HS, BU Mode: [Normal mode]
Note:
(*1) Refer to Registering a Handset to a Base Unit (P.23).
(*2) Refer to RF-BBIC Interface Signal Wave Form (P.45)
(*3) Refer to Adjustment Standard (Base Unit) (P.60)
(*4) Refer to Adjustment Standard (Handset) (P.64)
BU (Base Unit) Check
1. Register Regular HS to BU (to be
checked). (*1)
2. Press [Talk] key of the Regular HS to
establish link.
1. Check BBIC interface. (*2)
1. Check X'tal Frequency. (*3)
(10.368 MHz ± 100 Hz)
1. Register Regular HS to BU (to be
checked). (*1)
2. Press [Talk] key of the Regular HS to
establish link.
3. Compare the range of the BU (being
checked) with that of the Regular BU.
44
HS (Handset) Check
1. Register HS (to be checked) to Regular
BU. (*1)
2. Press [Talk] key of the HS to establish link.
1. Check BBIC interface. (*2)
1. Check X'tal Frequency. (*4)
(10.368 MHz ±100Hz)
1. Register HS (to be checked) to Regular
BU. (*1)
2. Press [Talk] key of the HS to establish link.
3. Compare the range of the HS (being
checked) with that of the Regular HS.