OPERATION
Grain Chute & Front Gate
Grain Chute
Front Gate
The grain chute and front gate are operated hydraulically from controls located on the
draw bar and the rear chassis. (See hydraulic diagram on page. )
Rear Tow Bar
The rear tow bar is designed for light vehicle transport only.
Do not use when the box is loaded
Do not use tow bar for towing large equipment (i.e. dump trailers etc)
Steering Axles
Controlled Hydraulically
Must be in locked position during higher speeds strait away use,
Must be locked during reverse and unloading
Caution when turning on hills
14DBP-001
17