Table of Contents
Advertisement
OPERATION
Unloading
WARNING : Some models are equipped with steering axles, for easier turning and
maneuvering. When traveling in the reverse direction the spool valve should be moved to
the extend the cylinders. The trailer wheels will then stay in-line and locked.
Bring the towing machine to a stop.
Always position the towing vehicle and trailer in a straight ahead position wherever
possible.
Check for overhead obstructions especially when inside a building and near power lines.
Select the towing vehicles tipping control and raise the trailer body, control the speed to
suit the type of material being carried.
Slowly drive forward to ensure the loaded material is fully discharged.
Stop the towing vehicle and fully lower the body and close the tailgate before driving off.
Always lower the trailer body when leaving the machine.
Take care when tipping on gradients
Avoid tipping on unconsolidated ground
Be prepared for a change in stability as the center of mass changes as the load is ejected
from the trailer . Slow flowing or sticking loads can apply an upwards force to the
drawbar.
Never leave the trailer raised when disconnected from the towing vehicle
14DBP-001
16
Advertisement
Table of Contents
