Using the Kensington lock
The Kensington security system connector is located at
the back of the Monitor set.
For more information on installation and usage, refer to
the Kensington lock user manual or visit the website at
http://www.kensington.com.
Connect the Kensington security system cable between
the Monitor set and a table.
NOTE
Use of the Kensington lock is optional.
y
The accessories can be purchased at your local
electronics store.
NOTE
The left or right side of the monitor head can be
y
slightly rotated up or down (up to 3°). Adjust the
horizontal level of the monitor head.
Installing the wall mount plate
This monitor supports the specification of the standard
wall mount plate or compatible device.
1
2
3
Monitor head
ASSEMBLING AND PREPARING
Place the screen face down. To protect the screen
from scratches, cover the surface with a soft cloth.
Place the wall mount plate onto the monitor and
align it with the screw holes.
Tighten the four screws to fix the plate to the moni-
tor using a screwdriver.
NOTE
The wall mount plate is sold separately.
y
For more information on installation, refer to the
y
wall mount plate's installation guide.
Be careful not to use excessive force when
y
mounting the wall mount plate, as this can dam-
age the monitor's screen.
13