LIMITED WARRANTY Global Shade Corporation offers a limited warranty that this product is free from defects in materials and workmanship for a period of one (1) year from the original date of purchase. At its discretion, Global Shade Corporation may provide replacement parts for defective parts to original purchaser after its own review and examination.
Page 3
WARNING: To reduce the risk of serious injury, read the following safety instructions thoroughly before assembling and using the gazebo. • Check with your local governing authority/local municipal codes regarding installation and permitting of such structures before assembly. • Use of personal protective equipment including gloves, safety glasses, and closed toe footwear is recommended during assembly.
Part List Label Description Sketch Post Base Cover Base Top Roof Fastening Piece Metal Corner of Big Roof Long Top Tube of Big Roof Short Top Tube of Big Roof Bevel Beam of Top Roof Middle Beam of Top Roof Bevel Beam of Roof Middle Beam of...
Page 5
Part List Label Description Sketch Left Beam of Short Side Right Beam of Short Side Left Beam of Long Side Right Beam of Long Side Middle Beam of Long Side Upper Short Beam of Big Roof Short Side Middle Short Beam of Big Roof Short Side Upper Short Beam of Big Roof Long Side...
Page 6
Part List Label Description Sketch Lower Short Beam of Top Roof Short Side Short Tube for Mosquito Netting Long Tube for Mosquito Netting Hook Upper Metal Panel of Top Roof Long Side Upper Metal Panel of Top Roof Short Side Lower Metal Panel of Top Roof Long Side Lower Metal Panel of...
Page 7
Part List Label Description Sketch Upper Right Metal Panel of Big Roof Long Side Middle Left Metal Panel of Big Roof Long Side Middle Right Metal Panel of Big Roof Long Side Lower Left Metal Pane of Big Roof Long Side Lower Right Metal Panel of Big Roof Long Side Bevel Beam Cover...
Page 10
Step 2 M6x20 M6x90 SETP2 Attention : SETP1 1. Please make sure the screws holes are correponded with each other when join J2, J, J1 with K7, K8, K9. 2. Pay attention to the direction of J when assemble. SETP3 SETP2 SETP1...
Page 12
Step 4 M6x20 M6x40 SETP2 SETP1 Rt=90º Use the framing square to ensure each Post remains at a 90 degree angle to the Short Beam and Long Beam. Secure each Arch Support to the Posts using 4pcs Screw (QQ) at each location.
Page 13
Step 5 M6x20 Attention: This step requires at least 5 people.
Page 14
Step 6 147.7 in M6x40 Site Dimensions Rt=90º Use the framing square to ensure each Post remains at a 90 degree angle to the Short Beam and Long Beam. Secure each Arch Support to the Posts using 4pcs Screw (QQ) at each location.
Need help?
Do you have a question about the HTDH168-BLK and is the answer not in the manual?
Questions and answers