Advertisement
INTRODUCTION
Thank you for selecting the [SENTRY] LED Floodlight. Please ensure that the luminaire is
installed in accordance with the below instructions. Teknik Lighting Solutions Pty Ltd assumes no
responsibility for inappropriate use or installation of the product, including any associated damage
caused.
PRECAUTION
1.
Read the entire manual carefully
before installation and operation.
2.
The Warranty Period is five (5) years.
Teknik will repair or replace the product if it
fails or becomes defective during normal
use within the prescribed warranty period.
3.
Designed for industrial and
commercial use.
4.
The lifetime of the product is affected
when it is used in a fully enclosed fixture.
5.
Installation must be performed by a
licenced and qualified electrician.
6.
Use solid copper wire of 18 AWG
(minimum) for the input terminal
extension, and 20 AWG (minimum)
for the output terminal extension.
7.
Do not change or tamper with any
internal electric circuits or wiring,
connectors or cables for any reasons.
8.
Do not insert foreign objects into the
product. This may result in electric shock,
malfunction or damage to the products.
SPECIFICATIONS
Input Voltage
Power
Lumen Output
Colour Temp
CRI
Beam Angle
Connection
Net Weight
Lifetime
IP Rating
Dimensions
2
100W
13000lm
2.7kg
285(L) x 50(W) x 302(H) 285(L) x 50(W) x 352(H) 285(L) x 50(W) x 415(H)
9.
When in operation the luminaire
temperature may reach up to 60°C.
10. Teknik accepts no liability for any injuries
or damages resulting from the incorrect
use of the lamp or use of the lamp in
combination with inappropriate equipment.
11. Luminaire is non-dimmable.
12. For further information, please
contact Teknik Lighting Solutions
or your local distributor.
13. This product has no user serviceable
parts. If any part is damaged, disconnect
from mains and discontinue use.
14. Warning: Luminaire marked as NON-
IC according to ASNZS60598-2.2. Not
suitable for use on residential properties.
DO NOT COVER OR ABUT. Any insulation
material must be positioned at a minimum
distance of 100 mm from the fitting.
15. Do not cover the light.
16. The warranty shall exclude modifications
to the product, incorrect installation and
use outside of the intended scope.
90-305 VAC ~ 50/60Hz
150W
19500lm
5000K
>70
Asymmetric T2
Flex and plug (1.2m)
3.2kg
≥50,000 hours
IP65
200W-100W
26000lm-13000lm
3.8kg
Advertisement
