Control elements Model light on/off switch 2. Fuse holders 3. Stand mount with tilt and rotation lock 4. Barndoor hinges with dual barndoor positioning (barndoors sold as optional accessory) www.profoto.com...
Attach barndoors (optional accessory) Attach the hinges to the rear side of the Striplight with two wing screws. 2. Attach the barndoors to the hinges with grip screws and screws. Adjust to desired position before tightening the grip screw. www.profoto.com...
2. Unplug the halogen bulbs from their sockets. Be careful to not damage the flash tube. WARNING – ELECTRIC SHOCK HAZARD - HIGH VOLTAGE! Before opening the lamp head, all lamp head cables must be disconnected from flash generator. www.profoto.com...
Change flash tube Flash tubes shall only be replaced by an authorized service technician. Contact your Profoto dealer or an authorized Profoto service station for professional service. Change fuse Remove the fuses according to picture below. See fuse rating in technical data.
Technical data Striplight S Striplight M Striplight L Size 69x10x14 cm 130x10x14 cm 190x10x14 cm (L x B x H) 27.2x3.9x5.5 in 51.2x3.9x5.5 in 74.8x3.9x5.5 in Weight 6.8 kg / 15 lb 10.5 kg / 23.2 lb 16 kg /35.3 lb...