Page 2
To reduce the risk of fire, electric shock or injury to persons or property, the following basic safety precautions should always be followed. Never use this appliance with a damaged cord, plug or other damaged parts. Check if the voltage indicated on the lab corresponds with the local mains voltage before you connect the appliance.
Page 4
The appliance is packed as separated parts. Simple assembly is required before use: ① Insert the battery pack into main body as picture shows. You will hear a click sound when fitted. ② Connect he tube to the main body. ③...
Page 5
Lithium Batter y Charging The battery needs to be charged when the indicator lights twinkle. The lights keep twinkling in circles while charging and turn to a complete circle while fully charged. Attention: Please use original charger or the lithium battery can be damaged. Start/stop working and switch speed Press the ON/OFF button to start and stop the machine.
Page 6
Dust cup cleaning and maintenance Method 1: Press the dust drop button and empty the dust into a rubbish bin. Method 2: Press the dust cup release button and take out the dust cup from the main body as the picture below. Take off the HEPA filter and cyclone cone, empty all the rubbish and clean it.
Page 7
Floor brush cleaning and maintenance ① Press the roll brush release button. ② Take the roll brush out. ③ Wash the roll brush and air dry it. Fix it back as the pictures below. ④ Reset the roll brush release button to the lock position. Motor rated voltage and rated power 22.2V 200W Floor brush rated voltage and rated power...
Page 8
Possible causes Resolutions Problem ● No power ● Charging Not working ● Brush protected or obstructed ● Restart the machine ● Dust cup is full of rubbish ● Clean the dust cup’s rubbish Weak suction/ ● HEPA filter is full of dust Trash drops ●...