Page 1
INSTRUCTION MANUAL Greenhouse and Cover SKY2533 Ver. 2...
Page 2
NOTICE • Do not stand on or use any part of this item as a step ladder. • Firmly secure all bolts, screws, and knobs RUBBER MALLET 1 PERSON UP TO 20 MIN. before use. (RECOMMENDED) ASSEMBLY ASSEMBLY • Reconfirm that all rods, knobs, or clips are secure every 90 days.
Page 3
PARTS SHELF SHELF CLIP COVER 8 PCS 16 PCS 1 PC PRODUCT ASSEMBLY Insert three part 1 shelf supports into two part A frame connectors. Firmly press the supports into the frame connector, then gently tap with a rubber mallet or fist to secure. Repeat three times to assemble the remaining frames.
Page 4
PRODUCT ASSEMBLY Insert four part 2 side frames into two part A frame connectors, two frames per connector. Repeat three times to assemble the remaining frames. Connect the four frame assemblies by inserting the side frames into the bottom openings on the frame connectors.
Page 5
PRODUCT ASSEMBLY Insert two part 3 tops into the topmost frame connectors. Firmly press the supports into the frame connector. Check for any loose connections and place the assembled product upright.
Page 6
PRODUCT ASSEMBLY Place two part 4 shelves onto the supports and secure with four part 5 shelf clips, two clips per shelf.
Page 7
PRODUCT ASSEMBLY Place the part 6 cover on top of the shelf assembly. Release two zippers to open the cover and secure to the top of the cover for easy maintenance. NOTE: To assure a secure assembly, place this item flat against an existing wall, and firmly push on each level/shelf.
Page 8
HELP CENTER Question about your product? We're here to help. Visit us at: help.bestchoiceproducts.com CHAT Chat Support Product Inquiry Orders FAQ Product Assembly Returns & Refunds PRODUCT WARRANTY INFORMATION All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the item is returned in its original product packaging and all accessories from its original shipment are included.
Need help?
Do you have a question about the SKY2533 and is the answer not in the manual?
Questions and answers