Replacement Of The Cd Servo P.c.b. And Optical Pick-Up Unit - Panasonic SA-PM25 Service Manual

7.3.1. Replacement of the CD Servo P.C.B. and Optical Pick-up Unit.

Step 2 Desolder the 4 legs of 2 motors and flip over the CD Servo P.C.B.
Step 3 Remove the flexible cable at CN701.
- Removal of the flexible cable / Push the top of the connector in the
direction of the arrow 1 and then pull out the flexible cable in the
direction of the arrow 2.
NOTE : Insert a short pin into the flexible cable.
Step 4 Push the lever in and turn the gear clock wise fully.
16