Introduction; Intended Use; Assembly Instructions; How To Use - aidapt VM862 Fixing And Maintenance Instructions

INTRODUCTION

Thank you for purchasing the Step Stool with Handrail from Aidapt.
Please examine your product for any visible damage before using/installing. If you
see any damage or suspect a fault, please do not use, but contact your supplier.

INTENDED USE

The Step Stool with Handrail is ideal for those hard to reach places. It is a versatile
step that can be used in the bathroom, kitchen or other areas around the home.
It consists of an anti-slip rubber surface, rubber ferrules and a rubber handrail for
additional grip.

ASSEMBLY INSTRUCTIONS

1. Attach metal poles to step base using the bolts and locking nuts provided.
Only tighten half way (fig. 1)
2. Attach handle to assembled section using the fastening buttons (fig. 2)
Ensure the buttons fully pop out of each hole (fig. 3)
3.
4. Fully tighten the bolts and locking nuts (fig. 4)
(fig. 1)

HOW TO USE

When using the step, please ensure you only step on the centre.

WARNING

•
Maximum weight load limit: 150kg (23st 8lbs)
•
DO NOT exceed maximum weight load
•
DO NOT use near hot surfaces, cookers or hot water in case of fall
•
DO NOT stand on crossbars at any time. Risk of injury
•
DO NOT jump on step
•
DO NOT lean from step when in use
•
This is NOT a toy; children should be supervised around this item
•
Not recommended for use by anyone who needs assistance walking
•
DO NOT use on uneven or unstable surfaces
•
Periodically check to ensure all fixings are secure, and tighten if necessary
Fixing and Maintenance Instructions
(fig. 2)
1
(fig. 3) (fig. 4)