Troubleshooting - Lonpoo LP-100 User Manual

Troubleshooting

Problem
Remote control doesn't
work.
No picture.
No picture when using
an HDMI connection.
No sound when using an
HDMI connection.
High definition video
signal is not playing on
the TV.
• Make sure the player is connected to a
power outlet.
• Insert the batteries correctly.
• Point the remote control at the IR sensor
located on the front panel.
• If the remote still does not function try
putting new batteries into the remote control.
See your TV's manual for the correct video
input selection. Change the input source until
you see the picture.
• If this player is connected to an
unauthorized display device with an HDMI
cable, the audio/visual signal may not be
displayed.
• Check if the HDMI cabie is faulty. If faulty or
damaged, replace the HDMI cable.
• If this happens when you change the
resolution setting, press resolution on the
remote control repeatedly until the picture
appears.
You may not hear any sound from the HDMI
output if the connected device is non-HDCP
compliant or only DIVI compatible.
• Ensure that the audio cables are connected
to the audio input of the TV.
• Assign the audio input of the TV to the
corresponding video input. See the TV user
manual for details.
Solution
21