Instructions - Lonpoo LP-100 User Manual

Instructions

Basic Operations
Turn On
Press
POWER
Turn on the TV and switch to the correct video input (refer to the TV user
manual).
Setup Menu
Press the
SETUP button
When a menu is displayed, use the
to navigate.
Note: During Blu-ray disc playback, the setup menu will not appear. Press the
button, then press the
continue from where you left off.
Select a Language
1. Select 'General Settings' in the SETUP nenu.
2. Use the
\
3. Press the
the selection menu - then you can select the language you want.
4. Press to confirm.
OK
Play a Disc
1. Press to open the disc compartment.
2. Insert a disc with the labelled side facing up.
3. Press to close the disc compartment. The disc will play automatically.
4. To stop the disc playing, press
10
to turn on the Blu-ray disc player.
to display the setup menu on the TV screen.
SETUP button
buttons to select the Language.
button to select the OSD and press the
buttons on the remote control
/ / /
to enter the menu. After that you can
.
button again to enter