Sony VAIO PCG-GRX700 Series Quick Start Manual page 60

VAIO® Computer Quick Start
4 Press the Right Arrow key
Down Arrow key
default values for all SETUP items appears.
5 Press Enter. The Setup Confirmation window appears.
6 Select Yes, and press Enter.
7 Select Exit (Save Changes), and press Enter. The Setup Confirmation
window appears again.
8 Select Yes, and press Enter. The computer restarts.
✍
If this occurs on a regular basis, contact Sony Computing Support
(http://www.sony.com/pcsupport).
What do I do if the message, "Operating system not found" appears when my
computer starts, and why won't Windows start?
❑
Make sure the computer does not have a "non-bootable" floppy disk in the
floppy disk drive (if applicable).
❑
If a non-bootable floppy disk is in the drive:
1 Remove the floppy disk.
2 Restart the computer and confirm that the Microsoft® Windows®
operating system starts properly.
❑
If Windows still does not start, follow these steps to initialize the BIOS:
1 If there is a disk in the floppy disk drive, then remove it.
2 Turn off the computer.
3 Remove any peripheral devices connected to the computer.
4 Restart the computer.
5 Press F2 when the Sony logo appears. The BIOS Setup window
appears.
6 Press the Right Arrow key
7 Press the Down Arrow key
message Load default values for all SETUP items appears.
8 Press Enter. The Setup Confirmation window appears.
60
to select the Exit tab, and then press the
to select Get Default Values. The message Load
to select the Exit menu.
to select Get Default Values. The