Toshiba SD-P2600 Owner's Manual page 23

LCD screen/external screen selection
Press MONITOR button on the player.
Each time the button is pressed, the
MONITOR
LCD screen will change as below.
External Interlace
External Progressive
External Interlace: When connected to an
Interlaced TV or monitor.
External Progressive: When connected to a
Progressively scanned TV or
monitor.
Notes
• After selecting the external screen, images will be
displayed on the LCD monitor for 3 seconds before
switched to the external screen mode.
• Normal images will not appear if the output signal is set
to Progressive and connected to an Interlace compatible
TV. Select the proper output signal settings via the LCD
monitor of this device.
• The MONITOR button can not work while you are
viewing an input source from the connected equipment.
Normal
About the screen saver
If you pause a picture of a DVD video disc and leave it
still for a long while, the screen saver of the player
automatically appears (when "Screen Saver" is set to
"On" ). To turn off the screen saver, press the PLAY
72
button on the main unit or remote control.
Automatic Power Off function
If the player is stopped, or the screen saver is engaged
for approximately 20 minutes, the player will
automatically turn itself off.
About the LCD
• The color LCD is manufactured using extremely high
precision technology, but even so may include
certain pixels that do not operate properly (that do
not light, that remain lit constantly, etc.). We do our
best to keep the number of these defective pixels to
a minimum, but please understand that they cannot
be completely eliminated even with the most
advanced manufacturing technologies available
today.
• The fluorescent tube which illuminates the panel
from the inside will deteriorate with use. (The
standard life length is about 10,000 hours of
continuous use at normal temperature. This is
referential information only and is not warranted.)
When the LCD becomes dim, flickers, or does not
illuminate, contact your dealer for replacement.
• The brightness of the LCD monitor differs slightly
depending on the viewing angles. Adjust the LCD
monitor angle to obtain the best viewing. (The
recommended viewing angle is 90 degrees to the
monitor.)
23